B163D Jeep Code - Front Left Turn Control Circuit Open
Quick Answer
The Body Control Module (BCM) receives a communication network message from the Steering Column Control Module (SCCM) requesting turn signal lamp illumination. Common causes include Blown Front Left Park and Turn Signal Bulb, Faulty Front Left Turn Lamp, Front Left Turn Lamp harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B163D Jeep indicates Front Left Turn Control Circuit Open.
- Common causes
- Common causes include Blown Front Left Park and Turn Signal Bulb, Faulty Front Left Turn Lamp, Front Left Turn Lamp harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B163D Jeep Description
What are the Possible Causes of the DTC B163D Jeep?
- Blown Front Left Park and Turn Signal Bulb
- Faulty Front Left Turn Lamp
- Front Left Turn Lamp harness is open or shorted
- Front Left Turn Lamp circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B163D Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B163D Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B163D Jeep code?
Need more information on how to fix the B163D Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B163D Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B163D Jeep Code
1. What are the common symptoms of OBDII code B163D in a Jeep related to the Front Left Turn Control Circuit Open?
- Common symptoms include the front left turn signal not working, rapid blinking of the turn signal, or the turn signal staying on without blinking.
2. What can cause the Front Left Turn Control Circuit Open code B163D in a Jeep?
- Possible causes include a faulty turn signal bulb, a damaged wiring harness, a malfunctioning turn signal switch, or a defective control module.
3. How can I diagnose the Front Left Turn Control Circuit Open issue in my Jeep?
- You can start by visually inspecting the front left turn signal bulb, checking the wiring for any visible damage, and using a multimeter to test the continuity of the circuit.
4. Is it safe to continue driving my Jeep with the B163D OBDII code for the Front Left Turn Control Circuit Open?
- It is not recommended to drive the vehicle with this code as it can affect your visibility to other drivers and compromise your safety on the road.
5. Can I repair the Front Left Turn Control Circuit Open issue in my Jeep myself?
- Depending on your skill level, you may be able to replace the faulty turn signal bulb or repair a damaged wire. However, more complex issues may require professional diagnosis and repair.
6. How much does it typically cost to fix the B163D code related to the Front Left Turn Control Circuit Open in a Jeep?
- The cost of repairing this issue can vary depending on the exact cause of the problem, but it may range from $50 for a simple bulb replacement to a few hundred dollars for more extensive repairs.
7. Will resetting the OBDII code B163D make the issue go away permanently?
- Resetting the code may temporarily turn off the warning light, but if the underlying problem is not fixed, the code is likely to reappear once the issue is detected again.
8. Is the Front Left Turn Control Circuit Open problem a common issue in Jeep vehicles?
- While not extremely common, issues with turn signal circuits can occur in various vehicles, including Jeeps, due to factors like wear and tear, electrical faults, or environmental damage.
9. Can extreme weather conditions impact the Front Left Turn Control Circuit in a Jeep?
- Yes, extreme weather conditions such as heavy rain, snow, or extreme temperatures can potentially damage the wiring or components related to the turn signal circuit, leading to the B163D code.
10. How long does it usually take to repair the Front Left Turn Control Circuit Open issue in a Jeep?
- The repair time can vary depending on the specific cause of the problem. Simple fixes like bulb replacement may take around 30 minutes, while more complex issues could require several hours or more.
Discuss the causes and fixes for B163D Jeep OBDII Code
Code B163D Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
