AutoCodes – Jeep – B1630 Jeep

B1630 Jeep Code - Right Low Beam Control Circuit High

Quick Answer

The Front Totally Integrated Power Module (TIPM) monitors the Right Low Beam. Common causes include Faulty Right Low Beam Bulb, Right Low Beam Bulb harness is open or shorted, Right Low Beam Bulb circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1630 Jeep indicates Right Low Beam Control Circuit High.
Common causes: Common causes include Faulty Right Low Beam Bulb, Right Low Beam Bulb harness is open or shorted, Right Low Beam Bulb circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 22,303

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 24, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1630 Jeep Description

The Front Totally Integrated Power Module (TIPM) monitors the Right Low Beam. The TIPM sets the OBDII code when the Right Low Beam is not to factory specifications.

OBDII Code B1630 Jeep - Right Low Beam Control Circuit High - AutoCodes.com — B1630 Jeep Code - Right Low Beam Control Circuit High

What does this mean?

What are the Possible Causes of the DTC B1630 Jeep?

Faulty Right Low Beam Bulb
Right Low Beam Bulb harness is open or shorted
Right Low Beam Bulb circuit poor electrical connection
Faulty Front Totally Integrated Power Module (TIPM)

How to Fix the DTC B1630 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1630 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1630 Jeep code?

Need more information on how to fix the B1630 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1630 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1630 Jeep Code

1. What are the common symptoms of OBDII code B1630 in a Jeep related to the right low beam control circuit high?

- The common symptoms include the right low beam headlight not functioning or staying on constantly.

2. What are the possible causes of OBDII code B1630 in a Jeep for the right low beam control circuit high?

- The possible causes can be a faulty headlight bulb, a problem with the headlight wiring, or a malfunctioning headlight control module.

3. How can I diagnose the issue causing OBDII code B1630 in my Jeep for the right low beam control circuit high?

- You can start by checking the right low beam headlight bulb for any signs of damage or burnout. Then, inspect the wiring for any visible damage or loose connections.

4. Can I repair OBDII code B1630 in my Jeep related to the right low beam control circuit high on my own?

- Depending on your expertise, you may be able to replace the headlight bulb or repair simple wiring issues. However, complex electrical problems may require professional assistance.

5. Is it safe to continue driving my Jeep with OBDII code B1630 for the right low beam control circuit high?

- It is not recommended to drive with a malfunctioning headlight, as it can reduce visibility and compromise safety, especially in low-light conditions.

6. Will resetting the OBDII code B1630 in my Jeep for the right low beam control circuit high make the issue go away?

- Resetting the code may temporarily turn off the warning light, but it will not fix the underlying issue causing the malfunction.

7. How much does it typically cost to repair OBDII code B1630 in a Jeep for the right low beam control circuit high?

- The cost of repair can vary depending on the root cause of the issue, but it may range from a simple bulb replacement to more extensive wiring repairs.

8. Can extreme weather conditions contribute to triggering OBDII code B1630 in a Jeep for the right low beam control circuit high?

- Yes, extreme weather conditions such as heavy rain or snow can potentially cause electrical issues that trigger this code.

9. Are there any preventive measures I can take to avoid OBDII code B1630 in my Jeep for the right low beam control circuit high?

- Regularly inspecting and maintaining your vehicle's headlights, wiring, and control modules can help prevent issues that lead to this error code.

10. How long does it typically take to repair OBDII code B1630 in a Jeep related to the right low beam control circuit high?

- The repair time can vary depending on the complexity of the issue, but it may take anywhere from a few minutes for a bulb replacement to several hours for more extensive repairs.