AutoCodes – Jeep – B162E Jeep

B162E Jeep Code - Right Low Beam Control Circuit Short

Quick Answer

The Body Control Module (BCM) receives the input from the headlamp switch requesting low beam lamp illumination. Common causes include Faulty Right Low Beam Bulb, Right Low Beam Bulb harness is open or shorted, Right Low Beam Bulb circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B162E Jeep indicates Right Low Beam Control Circuit Short.
Common causes: Common causes include Faulty Right Low Beam Bulb, Right Low Beam Bulb harness is open or shorted, Right Low Beam Bulb circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,299

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 27, 2019

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B162E Jeep Description

The Body Control Module (BCM) receives the input from the headlamp switch requesting low beam lamp illumination. The BCM provides a voltage output through the low beam driver circuit. The BCM sets the OBDII code when the Right Low Beam Control Circuit is not to factory specifications.

OBDII Code B162E Jeep - Right Low Beam Control Circuit Short - AutoCodes.com — B162E Jeep Code - Right Low Beam Control Circuit Short

What does this mean?

What are the Possible Causes of the DTC B162E Jeep?

Faulty Right Low Beam Bulb
Right Low Beam Bulb harness is open or shorted
Right Low Beam Bulb circuit poor electrical connection
Faulty Body Control Module (BCM)

How to Fix the DTC B162E Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B162A-11 RIGHT LOW BEAM CONTROL CIRCUIT SHORT TO GROUND BASE
B162A-11 RIGHT LOW BEAM CONTROL CIRCUIT SHORT TO GROUND PREMIUM
B162A-15 RIGHT LOW BEAM CONTROL CIRCUIT SHORT TO BATTERY OR OPEN BASE
B162A-15 RIGHT LOW BEAM CONTROL CIRCUIT SHORT TO BATTERY OR OPEN PREMIUM

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B162E Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B162E Jeep code?

Need more information on how to fix the B162E Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B162E Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B162E Jeep Code

1. What are common symptoms of OBDII code B162E in a Jeep related to the right low beam control circuit short?

- Common symptoms include the right low beam headlight not working, flickering, or staying on constantly.

2. What are some possible causes of the right low beam control circuit short in a Jeep triggering OBDII code B162E?

- Causes can include a damaged wiring harness, a faulty headlight bulb, a defective headlight control module, or a blown fuse.

3. How can I diagnose the right low beam control circuit short in my Jeep if OBDII code B162E is triggered?

- Start by visually inspecting the wiring harness and connectors for any visible damage. Use a multimeter to check for continuity and shorts in the circuit.

4. Are there any simple repair tips for addressing the right low beam control circuit short in my Jeep?

- Check and replace any blown fuses related to the right low beam circuit. Ensure all connections are secure and free of corrosion.

5. Can a DIY enthusiast fix the right low beam control circuit short issue in a Jeep, or is professional help recommended?

- Depending on your experience with automotive electrical systems, you may be able to fix the issue yourself. However, if you are unsure, it's best to seek professional help to avoid further damage.

6. What are the potential risks of driving with the OBDII code B162E related to the right low beam control circuit short unresolved?

- Driving with a malfunctioning right low beam headlight can reduce visibility, posing a safety risk to you and other drivers, especially at night or in low-light conditions.

7. Will resetting the OBDII code B162E related to the right low beam control circuit short make the issue go away permanently?

- Resetting the code may temporarily turn off the warning light, but if the underlying issue causing the short is not fixed, the code is likely to reappear.

8. How much can I expect to pay for professional repairs related to the OBDII code B162E in a Jeep's right low beam control circuit?

- Repair costs can vary depending on the exact cause of the issue and labor rates in your area. It's best to get a diagnostic assessment from a trusted mechanic for an accurate estimate.

9. Are there any preventative maintenance steps I can take to avoid encountering the right low beam control circuit short issue in my Jeep in the future?

- Regularly inspecting the condition of your vehicle's wiring harness, connectors, and headlights can help catch potential issues early and prevent a short circuit from occurring.