B1629 Jeep Code - Cargo Lamp Control Circuit Open
Quick Answer
The Instrument Cluster monitors the Cargo Lamp. Common causes include Faulty Cargo Lamp, Cargo Lamp harness is open or shorted, Cargo Lamp circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1629 Jeep indicates Cargo Lamp Control Circuit Open.
- Common causes
- Common causes include Faulty Cargo Lamp, Cargo Lamp harness is open or shorted, Cargo Lamp circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1629 Jeep Description
What are the Possible Causes of the DTC B1629 Jeep?
- Faulty Cargo Lamp
- Cargo Lamp harness is open or shorted
- Cargo Lamp circuit poor electrical connection
- Faulty Instrument Cluster
How to Fix the DTC B1629 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1629 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1629 Jeep code?
Need more information on how to fix the B1629 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1629 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1629 Jeep Code
What does the OBDII code B1629 mean for my Jeep?
The B1629 code indicates a problem with the cargo lamp control circuit, specifically that the circuit is open or has a fault preventing the cargo lamp from functioning properly.
What are the common symptoms of the B1629 code?
Common symptoms include a non-functional cargo lamp, illuminated warning lights on the dashboard, or issues with other related lighting systems.
What are the potential causes of the B1629 code?
Potential causes include a broken or frayed wire in the cargo lamp circuit, a faulty cargo lamp switch, or a defective body control module (BCM).
How can I diagnose the B1629 code?
To diagnose the B1629 code, check the wiring and connectors for damage, test the cargo lamp switch for proper operation, and inspect the BCM for any faults.
What should I check first when troubleshooting the B1629 code?
Start by visually inspecting the wiring and connectors related to the cargo lamp for any signs of damage or corrosion, as these are common culprits.
Can I repair the B1629 code myself?
Yes, if you have basic automotive knowledge, you can often repair the issue by fixing or replacing damaged wiring or components. However, if the BCM is faulty, you may need professional help.
What tools do I need to fix the B1629 code?
You will need a multimeter to test electrical connections, wire strippers and connectors for any repairs, and possibly a scan tool to clear the code after repairs.
How do I clear the B1629 code after repairs?
After completing the necessary repairs, use an OBDII scanner to clear the code from the vehicle's computer, or disconnect the battery for a few minutes to reset the system.
Is it safe to drive with the B1629 code?
While it may be safe to drive, the non-functional cargo lamp could pose a safety risk, especially if you're transporting items in the cargo area. It's best to address the issue promptly.
Discuss the causes and fixes for B1629 Jeep OBDII Code
Code B1629 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
