B1623 Jeep Code - Glovebox Lamp Control Circuit Low
Quick Answer
The Instrument Cluster monitors the Glovebox Lamp. Common causes include Faulty Glovebox Lamp, Glovebox Lamp harness is open or shorted, Glovebox Lamp circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1623 Jeep indicates Glovebox Lamp Control Circuit Low.
- Common causes
- Common causes include Faulty Glovebox Lamp, Glovebox Lamp harness is open or shorted, Glovebox Lamp circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1623 Jeep Description
What are the Possible Causes of the DTC B1623 Jeep?
- Faulty Glovebox Lamp
- Glovebox Lamp harness is open or shorted
- Glovebox Lamp circuit poor electrical connection
- Faulty Instrument Cluster
How to Fix the DTC B1623 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1623 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1623 Jeep code?
Need more information on how to fix the B1623 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1623 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1623 Jeep Code
1. What does the OBDII code B1623 mean for a Jeep?
The code B1623 indicates a problem with the glovebox lamp control circuit, specifically that the circuit is reading a low voltage condition.
2. What are the common symptoms of code B1623 in a Jeep?
Symptoms may include the glovebox light not working, a burnt-out bulb, or other minor electrical issues related to the glovebox area.
3. What causes the B1623 code to appear in a Jeep?
Common causes include a faulty glovebox light bulb, damaged wiring, a poor connection, or a malfunctioning glovebox lamp control circuit.
4. Can a blown fuse cause the B1623 code in a Jeep?
Yes, a blown fuse in the circuit powering the glovebox light can lead to this code being triggered.
5. How can I diagnose the B1623 code in my Jeep?
Start by inspecting the glovebox light bulb, wiring, and connectors for damage or corrosion. Use a multimeter to check for proper voltage in the circuit.
6. Is the B1623 code serious?
No, this code is typically not serious and does not affect vehicle performance, but it should be addressed to restore proper functionality of the glovebox light.
7. How do I fix the B1623 code in a Jeep?
Repairs may include replacing the light bulb, repairing damaged wiring, tightening loose connections, or replacing a faulty fuse.
8. Can I clear the B1623 code without fixing the issue?
You can clear the code using an OBDII scanner, but it may return if the underlying issue is not resolved.
9. How much does it cost to fix the B1623 code on a Jeep?
Repair costs are typically low, often less than $50, as the issue usually involves replacing a bulb or repairing wiring.
10. Can a DIYer fix the B1623 code?
Yes, most DIYers can fix this issue with basic tools and troubleshooting skills, such as inspecting and replacing electrical components.
Discuss the causes and fixes for B1623 Jeep OBDII Code
Code B1623 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
