AutoCodes – Toyota – B158F 2013 Toyota RAV4

B158F 2013 Toyota RAV4 Code - AV Signal Stoppage Low Battery Voltage

Quick Answer

This Diagnostic Trouble Code (DTC) is stored when a video or audio signal is interrupted due to battery voltage input to the Radio and Display Receiver Assembly (or Navigation Receiver Assembly) dropping temporarily. Common causes include Faulty Radio and Display Receiver Assembly (or Navigation Receiver Assembly), Radio and Display Receiver Assembly harness is open or shorted, Radio and Display Receiver Assembly circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B158F 2013 Toyota RAV4 indicates AV Signal Stoppage Low Battery Voltage.
Common causes: Common causes include Faulty Radio and Display Receiver Assembly (or Navigation Receiver Assembly), Radio and Display Receiver Assembly harness is open or shorted, Radio and Display Receiver Assembly circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 304

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 25, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B158F 2013 Toyota RAV4 Description

OBDII Code B158F 2013 Toyota RAV4 - AV Signal Stoppage Low Battery Voltage - AutoCodes.com — B158F 2013 Toyota RAV4 Code - AV Signal Stoppage Low Battery Voltage

What does this mean?

What are the Possible Causes of the DTC B158F 2013 Toyota RAV4?

Faulty Radio and Display Receiver Assembly (or Navigation Receiver Assembly)
Radio and Display Receiver Assembly harness is open or shorted
Radio and Display Receiver Assembly circuit poor electrical connection

How to Fix the DTC B158F 2013 Toyota RAV4?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B158F 2013 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B158F 2013 Toyota RAV4 code?

Need more information on how to fix the B158F 2013 Toyota RAV4 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B158F 2013 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B158F 2013 Toyota RAV4 Code

1. What are the common symptoms of OBDII code B158F in a 2013 Toyota RAV4?

- Common symptoms include issues with the audio and visual (AV) system, such as a loss of audio or display functions.

2. What is the typical cause of OBDII code B158F in a 2013 Toyota RAV4?

- The code B158F is often triggered by low battery voltage, which can disrupt the AV signal in the vehicle.

3. How can I diagnose the AV signal stoppage due to low battery voltage in my 2013 Toyota RAV4?

- Use a diagnostic scanner to read the OBDII code B158F and check the battery voltage to confirm if it is below the required level.

4. Are there any quick fixes for OBDII code B158F related to low battery voltage in a 2013 Toyota RAV4?

- Try resetting the AV system by disconnecting the battery for a few minutes and then reconnecting it to see if the issue resolves.

5. Can a weak car battery cause OBDII code B158F to appear in a 2013 Toyota RAV4?

- Yes, a weak or failing car battery can lead to low voltage levels that trigger the AV signal stoppage and the B158F trouble code.

6. Is it safe to continue driving my 2013 Toyota RAV4 with the OBDII code B158F related to low battery voltage?

- It is generally safe to drive, but it is recommended to address the underlying battery issue to prevent further electrical system problems.

7. How much does it typically cost to repair OBDII code B158F in a 2013 Toyota RAV4?

- The cost of repair can vary depending on the exact cause, but it may involve replacing the battery or addressing any wiring issues, with an estimated cost ranging from $100 to $300.

8. Can a DIY enthusiast fix OBDII code B158F in a 2013 Toyota RAV4, or is it best left to professionals?

- DIY enthusiasts with some knowledge of automotive systems may be able to address the low battery voltage issue causing the code B158F, but if unsure, it's best to consult a professional technician.

9. Will resetting the OBDII code B158F in a 2013 Toyota RAV4 make the problem go away permanently?

- Resetting the code may temporarily clear the warning, but if the underlying issue of low battery voltage persists, the code is likely to reappear until the root cause is addressed.

10. How can I prevent OBDII code B158F related to low battery voltage from recurring in my 2013 Toyota RAV4?

- Regularly check the condition of your car battery, ensure proper maintenance, and address any electrical issues promptly to prevent the reoccurrence of low voltage and the associated AV signal stoppage.