AutoCodes – Jeep – B1570 Jeep

B1570 Jeep Code - USB Communication Overcurrent

Quick Answer

This Diagnostic Trouble Code (DTC) will set by connecting an unsupported USB device into the USB port for greater than 10 seconds. Common causes include Damaged or Unsupported USB Device, Damaged or Unsupported USB Cable, Faulty Radio. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1570 Jeep indicates USB Communication Overcurrent.
Common causes: Common causes include Damaged or Unsupported USB Device, Damaged or Unsupported USB Cable, Faulty Radio.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,308

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on May 05, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1570 Jeep Description

This Diagnostic Trouble Code (DTC) will set by connecting an unsupported USB device into the USB port for greater than 10 seconds.

OBDII Code B1570 Jeep - USB Communication Overcurrent - AutoCodes.com — B1570 Jeep Code - USB Communication Overcurrent

What does this mean?

What are the Possible Causes of the DTC B1570 Jeep?

Damaged or Unsupported USB Device
Damaged or Unsupported USB Cable
Faulty Radio

How to Fix the DTC B1570 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1570 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1570 Jeep code?

Need more information on how to fix the B1570 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1570 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1570 Jeep Code

1. What are the common symptoms of OBDII code B1570 in a Jeep related to USB Communication Overcurrent?

When this code is triggered, you may experience issues with the USB ports in your Jeep not functioning properly, such as not charging devices or recognizing USB drives.

2. What are some possible causes of OBDII code B1570 in a Jeep?

One common cause is a short circuit or overcurrent in the USB communication system, which can be due to a faulty USB port, damaged wiring, or a malfunctioning USB device.

3. How can I diagnose the OBDII code B1570 in my Jeep?

To diagnose this code, you can start by checking the USB ports and cables for any visible damage. Using a multimeter to test for continuity and voltage can also help pinpoint the issue.

4. Is it safe to continue driving my Jeep with the OBDII code B1570 related to USB Communication Overcurrent?

It is generally safe to drive your Jeep with this code, but you may not be able to use the USB ports until the issue is resolved. However, it is recommended to address the problem in a timely manner to avoid further electrical issues.

5. Can I repair the OBDII code B1570 in my Jeep myself?

Depending on your level of expertise, you may be able to repair this code yourself by replacing the faulty USB port, repairing damaged wiring, or troubleshooting the USB devices. Otherwise, seeking professional help is advised.

6. Will resetting the OBDII code B1570 in my Jeep make the issue go away?

Resetting the code may temporarily clear the warning light, but it will not fix the underlying issue causing the overcurrent in the USB communication system. It is important to diagnose and address the root cause of the problem.

7. Are there any preventive measures I can take to avoid OBDII code B1570 in my Jeep?

To prevent this code from recurring, avoid using damaged or incompatible USB devices in your Jeep, and periodically inspect the USB ports and wiring for any signs of wear or damage.

8. Can extreme weather conditions cause OBDII code B1570 related to USB Communication Overcurrent in a Jeep?

While extreme weather conditions may not directly cause this code, they can potentially exacerbate existing electrical issues, leading to malfunctions in the USB communication system.

9. How much does it typically cost to repair OBDII code B1570 in a Jeep?

The cost of repairing this code can vary depending on the extent of the damage and whether you choose to do the repairs yourself or seek professional help. Costs may include parts and labor.

10. Will fixing OBDII code B1570 improve the overall performance of my Jeep?

Resolving this code will restore the proper functioning of the USB communication system in your Jeep, allowing you to use the USB ports for charging devices and connecting peripherals as intended.