B1562 Jeep Code - GPS Antenna Circuit
Quick Answer
This Diagnostic Trouble Code (DTC) sets when the Radio detects a Global Positioning System (GPS) Antenna connection is shorted to ground or open for greater than 60 seconds. Common causes include Faulty GPS Antenna, GPS Antenna harness is open or shorted, GPS Antenna circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1562 Jeep indicates GPS Antenna Circuit.
- Common causes
- Common causes include Faulty GPS Antenna, GPS Antenna harness is open or shorted, GPS Antenna circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1562 Jeep Description
What are the Possible Causes of the DTC B1562 Jeep?
- Faulty GPS Antenna
- GPS Antenna harness is open or shorted
- GPS Antenna circuit poor electrical connection
- Faulty Radio
How to Fix the DTC B1562 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B1562-13 GPS ANTENNA CIRCUIT OPEN
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1562 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1562 Jeep code?
Need more information on how to fix the B1562 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1562 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1562 Jeep Code
1. What does OBDII code B1562 mean on a Jeep?
Code B1562 indicates an issue with the GPS Antenna Circuit, which may involve a fault or disconnection in the wiring or antenna.
2. What are the symptoms of code B1562 on a Jeep?
Common symptoms include loss of GPS functionality, inaccurate navigation, or the infotainment system displaying errors related to the GPS signal.
3. What causes the B1562 code on a Jeep?
The code can be caused by a damaged GPS antenna, faulty wiring or connectors, or a malfunction in the navigation module.
4. Can a software issue trigger the B1562 code?
Yes, outdated or corrupted software in the infotainment or navigation system can occasionally lead to this code.
5. How do you diagnose a B1562 code on a Jeep?
Diagnosis involves inspecting the GPS antenna, checking for damaged or loose wiring, and testing the navigation module for proper functionality.
6. Can I drive my Jeep with the B1562 code?
Yes, the vehicle can still be driven safely; however, GPS and navigation features may not work correctly.
7. How do you fix the B1562 code on a Jeep?
Repairs may include replacing the GPS antenna, repairing or reconnecting damaged wiring, or updating the navigation software.
8. How much does it cost to fix the B1562 code on a Jeep?
Repair costs vary but can range from $100 to $400, depending on whether you need a new GPS antenna or simple wiring repairs.
9. Will disconnecting the battery clear the B1562 code on a Jeep?
While disconnecting the battery may temporarily clear the code, the issue will likely return unless the underlying problem is resolved.
10. Can a faulty GPS antenna drain the battery in my Jeep?
It’s unlikely, but if the circuit causes a persistent electrical fault, it could potentially contribute to battery drainage.
Discuss the causes and fixes for B1562 Jeep OBDII Code
Code B1562 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
