AutoCodes - Ford - B1507 FORD

B1507 FORD Code - Flash To Pass Switch Circuit Failure

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3
Table of contents

|B1507 FORD code possible causes

  • Faulty Headlamp Switch
  • Headlamp Switch harness is open or shorted
  • Headlamp Switch circuit poor electrical connection
  • Faulty Smart Junction Box (SJB)

|How do I fix the B1507 FORD code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|Cost of diagnosing the B1507 FORD code

Labor: 1.0

The cost of diagnosing the B1507 FORD code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|What are B1507 FORD code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|B1507 FORD code description

The Smart Junction Box (SJB) sends reference signals to the headlamp switch through circuits. When the headlamp switch is placed in the HEADLAMPS ON position, the voltage signal is routed to ground through the circuit. If the SJB detects a fault with the headlamp switch inputs, the SJB turns the exterior lamps on by default. When the SJB detects the headlamp switch in the HEADLAMPS ON position and the multifunction switch in the LOW BEAM position, the SJB sends voltage through circuits to the low beam headlamps. When the SJB detects the headlamp switch in the HEADLAMPS ON position and the multifunction switch in the HIGH BEAM position, the SJB sends voltage through circuits to the high beam headlamps. The SJB sends a reference signal to the multifunction switch through circuits CLF27 (GN/BN) and CLF17 (WH/OG). When the multifunction switch is placed in the FLASH-TO-PASS or HIGH BEAM position, the voltage signal is routed to ground. When the SJB detects a request for the flash-to-pass, the SJB sends voltage to the high beam headlamps. The OBDII codes when the SJB detects a short to ground from the flash-to-pass input circuit.
OBDII Code B1507 Ford - Flash To Pass Switch Circuit Failure - AutoCodes.com

|Need more information with the B1507 FORD code?

Need more information on how to fix the B1507 FORD code? Get Access to Factory Service Manuals

|Need help with a B1507 FORD code?

Get the B1507 Ford code diagnosed by a professional: Find a repair shop in your area

|B1507 FORD code comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the B1507 Ford code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧
Repair Importance Level: 3
 
1=Low 2=Medium 3=High What is this?
Repair Difficulty Level: 3
 
1=Easy 2=Moderate 3=Hard What is this?