AutoCodes.com | All About OBDII Engine Codes
AutoCodes - Dodge - B14C8 DODGE

B14C8 DODGE Code - Channel 12 Audio Speaker Output

- Code Popularity: 467 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents
By AutoCodes.com - Updated Apr 17, 2019
Share on Facebook   Share on Twitter   Share on Linkedin

|B14C8 DODGE code possible causes

  • Faulty Audio Amplifier
  • Audio Amplifier harness is open or shorted
  • Audio Amplifier circuit poor electrical connection

|How do I fix code B14C8 DODGE code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Does your car have Safety Recalls? → Check here

|B14C8 DODGE code tech notes

B14C8-2B CHANNEL 12 AUDIO SPEAKER OUTPUT WIRES SHORTED TOGETHER
B14C8-11 CHANNEL 12 AUDIO SPEAKER OUTPUT CIRCUIT SHORT TO GROUND
B14C8-12 CHANNEL 12 AUDIO SPEAKER OUTPUT CIRCUIT SHORT TO BATTERY
B14C8-13 CHANNEL 12 AUDIO SPEAKER OUTPUT CIRCUIT OPEN
B14C8-92 CHANNEL 12 AUDIO SPEAKER OUTPUT PERFORMANCE OR INCORRECT OPERATION

|Cost of diagnosing B14C8 DODGE code

Labor: 1.0

The cost of diagnosing the B14C8 DODGE code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

|What are B14C8 DODGE code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|B14C8 DODGE code description

The amplifier receives fused battery current from a fuse in the Power Distribution Center (PDC) at all times. The internal circuitry of the amplifier switches the amplifier on based upon a CAN-I bus message that is received from the Radio Receiver Module (RRM) whenever the RRM is turned on. The amplifier receives the sound signal inputs from the left and right rear outputs of the RRM, and then sends the amplified speaker outputs for each of those channels to the speakers.
The amplifier receives information from the Body Control Module (BCM) and RRM, that communicates the correct channel setting for optimum speaker sound and output.
There are two amplifiers available, an 8 channel, rated at 322 watts (7 channels are used) and a 12 channel (11 channels are used), rated at 506 watts.

OBDII Code b14c8 dodge - Channel 12 Audio Speaker Output - AutoCodes.com
B14C8 DODGE Code - Channel 12 Audio Speaker Output

|Need more information with the B14C8 DODGE code?

Need more information on how to fix the B14C8 DODGE code? Get Access to Factory Service Manuals

|Need help with a B14C8 DODGE code?

Get the b14c8 dodge code diagnosed by a professional: Find a repair shop in your area

|B14C8 DODGE code comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the b14c8 dodge code? Have you replaced any parts?
Any information is appreciated. Thanks