AutoCodes - Chrysler - B1483 CHRYSLER

B1483 CHRYSLER Code - Channel 8 Audio Speaker Output Circuit Shorted Together

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3
Table of contents

|B1483 CHRYSLER code possible causes

  • Faulty Audio Amplifier
  • Audio Amplifier harness is open or shorted
  • Audio Amplifier circuit poor electrical connection

|How do I fix the B1483 CHRYSLER code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|B1483 CHRYSLER code tech notes

B1483-11 CHANNEL 8 AUDIO SPEAKER OUTPUT CIRCUIT SHORT TO GROUND
B1483-12 CHANNEL 8 AUDIO SPEAKER OUTPUT CIRCUIT SHORT TO BATTERY
B1483-13 CHANNEL 8 AUDIO SPEAKER OUTPUT CIRCUIT OPEN
B1483-92 CHANNEL 8 AUDIO SPEAKER OUTPUT PERFORMANCE OR INCORRECT OPERATION

|Cost of diagnosing the B1483 CHRYSLER code

Labor: 1.0

The cost of diagnosing the B1483 CHRYSLER code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|What are B1483 CHRYSLER code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|B1483 CHRYSLER code description

The amplifier receives fused battery current from a fuse in the Power Distribution Center (PDC) at all times. The internal circuitry of the amplifier switches the amplifier on based upon a CAN-I bus message that is received from the Radio Receiver Module (RRM) whenever the RRM is turned on. The amplifier receives the sound signal inputs from the left and right rear outputs of the RRM, and then sends the amplified speaker outputs for each of those channels to the speakers.
The amplifier receives information from the Body Control Module (BCM) and RRM, that communicates the correct channel setting for optimum speaker sound and output.
There are two amplifiers available, an 8 channel, rated at 322 watts (7 channels are used) and a 12 channel (11 channels are used), rated at 506 watts.
OBDII Code B1483 Chrysler - Channel 8 Audio Speaker Output Circuit Shorted Together - AutoCodes.com

|Need more information with the B1483 CHRYSLER code?

Need more information on how to fix the B1483 CHRYSLER code? Get Access to Factory Service Manuals

|Need help with a B1483 CHRYSLER code?

Get the B1483 Chrysler code diagnosed by a professional: Find a repair shop in your area

|B1483 CHRYSLER code comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the B1483 Chrysler code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧
Repair Importance Level: 3
 
1=Low 2=Medium 3=High What is this?
Repair Difficulty Level: 3
 
1=Easy 2=Moderate 3=Hard What is this?