AutoCodesGMC – B144A 2015 GMC Sierra

B144A 2015 GMC Sierra Code - Run Power Relay Circuit

Quick Answer

The Body Control Module (BCM) feeds the ignition circuit by applying voltage when the ignition is in the ON position. Common causes include Faulty Ignition Main Relay, Ignition Main Relay harness is open or shorted, Ignition Main Relay circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B144A 2015 GMC Sierra indicates Run Power Relay Circuit.
Common causes
Common causes include Faulty Ignition Main Relay, Ignition Main Relay harness is open or shorted, Ignition Main Relay circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 172
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Apr 19, 2023
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B144A 2015 GMC Sierra Description

The Body Control Module (BCM) feeds the ignition circuit by applying voltage when the ignition is in the ON position. The Diagnostic Trouble Code (DTC) will be set when the BCM detects a fault in the ignition run relay coil control circuit.
OBDII Code B144A 2015 GMC Sierra - Run Power Relay Circuit - AutoCodes.com
B144A 2015 GMC Sierra Code - Run Power Relay Circuit

What are the Possible Causes of the DTC B144A 2015 GMC Sierra?

  • Faulty Ignition Main Relay
  • Ignition Main Relay harness is open or shorted
  • Ignition Main Relay circuit poor electrical connection
  • Faulty Body Control Module (BCM)

How to Fix the DTC B144A 2015 GMC Sierra?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B144A 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B144A 2015 GMC Sierra code?

Need more information on how to fix the B144A 2015 GMC Sierra code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B144A 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B144A 2015 GMC Sierra Code

1. What does the OBDII code B144A mean on a 2015 GMC Sierra?

The code B144A indicates an issue in the Run Power Relay Circuit, which controls power to certain systems when the vehicle is in "Run" mode.

2. What are common symptoms of the B144A code?

Symptoms may include electrical components not functioning, such as climate controls, infotainment systems, or interior lighting, and potential difficulty starting the vehicle.

3. What causes the B144A code to appear?

Common causes include a faulty run power relay, damaged wiring or connectors in the circuit, or issues with the body control module (BCM).

4. Can a bad run power relay trigger the B144A code?

Yes, a malfunctioning or failed run power relay is a primary cause of this code.

5. How do you diagnose the B144A code?

Diagnosis involves inspecting the run power relay, checking the wiring and connectors for damage, and verifying signals from the BCM using a diagnostic tool.

6. Is the B144A code serious?

While it may not immediately affect drivability, it can lead to electrical system malfunctions that may impact vehicle comfort and functionality.

7. How is the B144A code fixed?

Repairs may involve replacing the run power relay, repairing damaged wiring or connectors, or reprogramming or replacing the BCM if necessary.

8. Can I drive my GMC Sierra with the B144A code?

You can drive short distances, but electrical systems may not work properly, and the issue should be addressed promptly to avoid further complications.

9. What tools are needed to fix the B144A code?

You’ll need a multimeter to test electrical components, a diagnostic scanner to verify the code, and potentially replacement parts like a new relay or wiring.

10. How much does it cost to fix the B144A code?

Repair costs depend on the root cause but typically range from $100 to $500, including parts and labor.

Discuss the causes and fixes for B144A 2015 GMC Sierra OBDII Code

Code B144A 2015 GMC Sierra comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play