B1441:01 Code - Control Module Ignition OFF, Run, and Start Circuit Short to Voltage
Quick Answer
The vehicle Power Mode Master (PMM) is the Body Control Module (BCM). Common causes include Faulty Ignition Switch, Ignition Switch harness is open or shorted, Ignition Switch circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1441:01 indicates Control Module Ignition OFF, Run, and Start Circuit Short to Voltage.
- Common causes
- Common causes include Faulty Ignition Switch, Ignition Switch harness is open or shorted, Ignition Switch circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1441:01 Description
The Power Mode Master will activate relays and other direct outputs of the Power Mode Master as needed according to the calculated power mode. Some relays controlled by the BCM are switched ignition voltage outputs that are pass-through circuits within the BCM directly from the ignition switch. If these circuits are short to ground, the B+ circuit fuse to the ignition switch will open.
The Diagnostic Trouble Code (DTC) will be set when the Ignition circuit is shorted to voltage.
What are the Possible Causes of the DTC B1441:01?
- Faulty Ignition Switch
- Ignition Switch harness is open or shorted
- Ignition Switch circuit poor electrical connection
- Faulty Body Control Module (BCM)
How to Fix the DTC B1441:01?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B1441:04 Control Module Ignition OFF, Run, and Start Circuit Short to Ground or Open
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1441:01 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80β$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1441:01 code?
Need more information on how to fix the B1441:01 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1441:01 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1441:01 Code
No Frequently Asked Questions about B1441:01 Code found.
Discuss the causes and fixes for B1441:01 OBDII Code
Code B1441:01 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.