AutoCodesLincoln – B141B Lincoln

B141B Lincoln Code - Second Row Driver Inflatable Seatbelt Deployment Control Circuit

Quick Answer

The Restraint Control Module (RCM) continuously monitors the second row left safety belt inflator and circuits for the following faults: Resistance out of range, Unexpected voltage, Short to ground, Faulted second row left safety belt inflator. Common causes include Faulty Second Row Driver Inflatable Seatbelt, Second Row Driver Inflatable Seatbelt harness is open or shorted, Second Row Driver Inflatable Seatbelt circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means
B141B Lincoln indicates Second Row Driver Inflatable Seatbelt Deployment Control Circuit.
Common causes
Common causes include Faulty Second Row Driver Inflatable Seatbelt, Second Row Driver Inflatable Seatbelt harness is open or shorted, Second Row Driver Inflatable Seatbelt circuit poor electrical connection.
Severity
High - diagnose this code as soon as possible.
Can I drive?
Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 1,291
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Apr 09, 2019
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B141B Lincoln Description

The Restraint Control Module (RCM) continuously monitors the second row left safety belt inflator and circuits for the following faults: Resistance out of range, Unexpected voltage, Short to ground, Faulted second row left safety belt inflator. If a fault is detected, the RCM stores DTC B141B in memory and sends a message to the Instrument Panel Cluster (IPC) to illuminate the airbag warning indicator.
The RCM analyzes the deployment loop resistance to determine if a fault exists. The value displayed in the PID is the deployment loop resistance measured by the RCM. If the value displayed is lower or higher than the desired range, the RCM can set a DTC. As the deployment loop resistance drifts farther outside the desired range, the chance for a DTC increases. Small variations in resistance can occur due to the effect of road vibrations on terminal fit. Crimps and terminals can be affected by stress and harness movement and can cause an increase in resistance due to wire strain. These variables can result in an intermittent fault. For this reason, the test requires the PID value to be within the desired range before the fault is considered repaired, regardless if the module is reporting an on-demand DTC at the time of diagnosis. Following this direction helps make sure that minor changes in resistance do not create a repeat concern.
OBDII Code B141B Lincoln - Second Row Driver Inflatable Seatbelt Deployment Control Circuit - AutoCodes.com
B141B Lincoln Code - Second Row Driver Inflatable Seatbelt Deployment Control Circuit

What are the Possible Causes of the DTC B141B Lincoln?

  • Faulty Second Row Driver Inflatable Seatbelt
  • Second Row Driver Inflatable Seatbelt harness is open or shorted
  • Second Row Driver Inflatable Seatbelt circuit poor electrical connection
  • Faulty Restraint Control Module (RCM)

How to Fix the DTC B141B Lincoln?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B141B Lincoln code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B141B Lincoln code?

Need more information on how to fix the B141B Lincoln code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B141B Lincoln code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

  • Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
  • Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
  • Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
  • Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B141B Lincoln Code

1. What are the common symptoms of OBDII code B141B in a Lincoln related to the Second Row Driver Inflatable Seatbelt Deployment Control Circuit?

- Common symptoms include the airbag warning light being illuminated on the dashboard and potential non-deployment of the second-row driver inflatable seatbelt during a collision.

2. What are the possible causes of OBDII code B141B in a Lincoln?

- The code B141B can be triggered by issues such as a faulty seatbelt deployment control module, damaged wiring or connectors in the seatbelt system, or a malfunctioning inflatable seatbelt itself.

3. How can I diagnose the cause of OBDII code B141B in my Lincoln?

- Diagnosing code B141B typically involves using a professional OBDII scanner to retrieve the specific diagnostic trouble code, inspecting the seatbelt system wiring and connectors for damage, and testing the seatbelt deployment control module for proper functioning.

4. Can I continue driving my Lincoln with OBDII code B141B present?

- It is not recommended to drive the vehicle with code B141B active, as it indicates a potential safety concern with the second-row driver inflatable seatbelt system. It is advised to address the issue promptly to ensure the system functions correctly in the event of a collision.

5. How can I repair OBDII code B141B in my Lincoln?

- Repairing code B141B may involve replacing the faulty seatbelt deployment control module, repairing or replacing damaged wiring and connectors, or addressing any issues with the inflatable seatbelt mechanism. It is recommended to have a qualified technician perform the repairs.

6. Are there any safety risks associated with OBDII code B141B in a Lincoln?

- Yes, code B141B indicates a potential safety risk as it pertains to the proper deployment of the second-row driver inflatable seatbelt. It is crucial to address this issue promptly to ensure the safety features of the vehicle function as intended.

7. Can a DIY enthusiast fix OBDII code B141B in a Lincoln?

- While some basic troubleshooting steps can be performed by a DIY enthusiast, dealing with airbag and seatbelt systems requires specialized knowledge and tools. It is recommended to seek assistance from a professional mechanic to properly diagnose and repair code B141B.

8. How much does it typically cost to repair OBDII code B141B in a Lincoln?

- The cost of repairing code B141B can vary depending on the specific cause of the issue, the parts needed for replacement, and the labor rates of the repair shop. It is advisable to obtain quotes from different service centers to compare prices.

9. Will resetting the OBDII code B141B in my Lincoln make the issue go away?

- Simply resetting the diagnostic trouble code without addressing the underlying cause will not fix the issue permanently. It is essential to diagnose the problem accurately and perform the necessary repairs to ensure the safety system functions correctly.

10. How often should I have the seatbelt system in my Lincoln inspected to prevent OBDII code B141B from occurring?

- Regular maintenance and inspections of the seatbelt system, including the inflatable seatbelt components, wiring, and control module, can help prevent issues like code B141B from occurring. It is recommended to follow the manufacturer's maintenance schedule for optimal safety.

Discuss the causes and fixes for B141B Lincoln OBDII Code

Code B141B Lincoln comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play