B1415 2015 GMC Sierra Code - Control Module Voltage Reference Output 3
Quick Answer
The vehicle control modules or sensors monitor the system voltage to verify the system voltage is within the normal operating range. Common causes include Low battery voltage, Faulty Control Module, Control Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1415 2015 GMC Sierra indicates Control Module Voltage Reference Output 3.
- Common causes
- Common causes include Low battery voltage, Faulty Control Module, Control Module harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1415 2015 GMC Sierra Description
What are the Possible Causes of the DTC B1415 2015 GMC Sierra?
- Low battery voltage
- Faulty Control Module
- Control Module harness is open or shorted
- Control Module circuit poor electrical connection
How to Fix the DTC B1415 2015 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1415 2015 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1415 2015 GMC Sierra code?
Need more information on how to fix the B1415 2015 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1415 2015 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1415 2015 GMC Sierra Code
1. What does the OBDII code B1415 mean on a 2015 GMC Sierra?
The B1415 code indicates an issue with the "Control Module Voltage Reference Output 3," which typically involves a malfunction in the voltage reference circuit provided by the control module.
2. What are common symptoms of the B1415 code in a GMC Sierra?
Symptoms may include a check engine light, malfunctioning sensors or actuators, erratic vehicle behavior, or issues with systems relying on the affected voltage reference circuit.
3. What causes the B1415 code to appear?
Common causes include a short to ground, an open circuit, damaged wiring, a faulty control module, or a malfunctioning sensor connected to Voltage Reference Output 3.
4. Can a bad sensor trigger the B1415 code?
Yes, a faulty sensor connected to the Voltage Reference Output 3 circuit can cause the control module to detect an issue and set the B1415 code.
5. How do you diagnose the B1415 code on a 2015 GMC Sierra?
Diagnosis involves checking the wiring and connectors for damage, testing the voltage on the reference circuit, inspecting related sensors, and scanning for additional codes to pinpoint the issue.
6. Is it safe to drive with the B1415 code active?
Driving may still be possible but not recommended, as systems relying on the faulty voltage reference circuit may not function properly, potentially leading to safety concerns.
7. What tools are needed to fix the B1415 code?
You’ll need an OBDII scanner, a multimeter to test voltage and continuity, and possibly wiring repair tools if damaged wires or connectors are found.
8. How can I fix the B1415 code on my GMC Sierra?
Repairs may involve replacing damaged wiring, repairing loose or corroded connectors, replacing a malfunctioning sensor, or, in rare cases, replacing the control module.
9. How much does it cost to fix the B1415 code on a 2015 GMC Sierra?
The repair cost can range from $50 to $500, depending on whether it involves minor wiring repairs or the replacement of a sensor or control module.
10. Can the B1415 code clear itself after repairs?
The code may clear itself after the underlying issue is resolved, but you can also use an OBDII scanner to manually clear the code and confirm the repair.
Discuss the causes and fixes for B1415 2015 GMC Sierra OBDII Code
Code B1415 2015 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
