B1413 Mercury Code - Frontal Restraints Sensor
Quick Answer
The Restraint Control Module (RCM) monitors the LH front impact severity sensor circuits for the following faults: Open circuit, Short to voltage, Short to ground, Faulted LH front impact severity sensor. Common causes include Faulty Frontal Restraints Sensor, Frontal Restraints Sensor harness is open or shorted, Frontal Restraints Sensor circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1413 Mercury indicates Frontal Restraints Sensor.
- Common causes
- Common causes include Faulty Frontal Restraints Sensor, Frontal Restraints Sensor harness is open or shorted, Frontal Restraints Sensor circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1413 Mercury Description
What are the Possible Causes of the DTC B1413 Mercury?
- Faulty Frontal Restraints Sensor
- Frontal Restraints Sensor harness is open or shorted
- Frontal Restraints Sensor circuit poor electrical connection
- Faulty Restraint Control Module (RCM)
How to Fix the DTC B1413 Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B1413:93 Driver Frontal Restraints Sensor No Operation
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1413 Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1413 Mercury code?
Need more information on how to fix the B1413 Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1413 Mercury code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1413 Mercury Code
1. What are the common symptoms of OBDII code B1413 related to the Frontal Restraints Sensor in a Mercury vehicle?
- Common symptoms include the airbag warning light staying on, the airbag system failing to deploy in a collision, and diagnostic trouble codes related to the Frontal Restraints Sensor.
2. What are the possible causes of OBDII code B1413 in a Mercury for the Frontal Restraints Sensor?
- The code B1413 can be triggered by a faulty Frontal Restraints Sensor, damaged wiring or connectors in the airbag system, or issues with the airbag control module.
3. How can I diagnose the Frontal Restraints Sensor issue causing OBDII code B1413 in my Mercury?
- A thorough diagnostic scan with an OBDII scanner can identify the specific trouble code and pinpoint the faulty Frontal Restraints Sensor or related components needing attention.
4. Are there any safety concerns associated with OBDII code B1413 for the Frontal Restraints Sensor in a Mercury?
- Yes, driving with a malfunctioning airbag system due to the Frontal Restraints Sensor issue can pose serious risks in the event of a collision, as the airbags may not deploy as intended.
5. What are some repair tips for addressing OBDII code B1413 linked to the Frontal Restraints Sensor in my Mercury?
- It's crucial to consult a qualified mechanic or dealership for proper diagnosis and repair. They can assess the Frontal Restraints Sensor, wiring, connectors, and airbag control module to determine the exact issue.
6. Can I reset the OBDII code B1413 related to the Frontal Restraints Sensor in my Mercury on my own?
- While you can clear the code with an OBDII scanner, it's important to address the underlying problem causing the code to prevent safety risks associated with a malfunctioning airbag system.
7. How much does it typically cost to repair OBDII code B1413 for the Frontal Restraints Sensor in a Mercury?
- Repair costs can vary based on the extent of the issue and parts needing replacement, but it's advisable to budget for potential expenses related to Frontal Restraints Sensor diagnostics and repairs.
8. Are there any recalls or technical service bulletins related to OBDII code B1413 for the Frontal Restraints Sensor in Mercury vehicles?
- It's recommended to check with the manufacturer or authorized service centers for any recalls or technical service bulletins pertaining to the Frontal Restraints Sensor issue in your specific Mercury model.
9. Is it safe to drive my Mercury with OBDII code B1413 unresolved for the Frontal Restraints Sensor?
- It's not recommended to drive with the airbag system compromised by a Frontal Restraints Sensor issue, as it can affect the proper deployment of airbags in the event of an accident.
10. How can I prevent OBDII code B1413 from recurring in my Mercury due to the Frontal Restraints Sensor problem?
- Regular maintenance checks, prompt repairs of any airbag system issues, and following manufacturer recommendations can help prevent the reoccurrence of OBDII code B1413 related to the Frontal Restraints Sensor in your Mercury.
Discuss the causes and fixes for B1413 Mercury OBDII Code
Code B1413 Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
