B1400 2014 GMC Sierra Code - Control Module Supply Circuit 2
Quick Answer
The vehicle control modules or sensors monitor the system voltage to verify the system voltage is within the normal operating range. Common causes include Low battery voltage, Faulty Control Module, Control Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1400 2014 GMC Sierra indicates Control Module Supply Circuit 2.
- Common causes
- Common causes include Low battery voltage, Faulty Control Module, Control Module harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1400 2014 GMC Sierra Description
What are the Possible Causes of the DTC B1400 2014 GMC Sierra?
- Low battery voltage
- Faulty Control Module
- Control Module harness is open or shorted
- Control Module circuit poor electrical connection
How to Fix the DTC B1400 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1400 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1400 2014 GMC Sierra code?
Need more information on how to fix the B1400 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1400 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1400 2014 GMC Sierra Code
1. What does the OBDII code B1400 mean on a 2014 GMC Sierra?
Code B1400 indicates an issue with the "Control Module Supply Circuit 2," which refers to a problem in the power supply to certain control modules in the vehicle.
2. What are the common symptoms of code B1400 in a 2014 GMC Sierra?
Symptoms may include illuminated warning lights on the dashboard, malfunctioning electrical systems, or intermittent power loss to specific vehicle modules.
3. What causes the B1400 code to appear in a 2014 GMC Sierra?
Common causes include a blown fuse, damaged wiring, a faulty relay, poor ground connections, or a malfunctioning control module.
4. How can I diagnose the B1400 code on my 2014 GMC Sierra?
Start by inspecting fuses, relays, and wiring for damage. Use a multimeter to check for proper voltage in the affected circuit and scan for additional trouble codes.
5. Can I still drive my 2014 GMC Sierra with a B1400 code?
While the vehicle may still operate, driving with this code can lead to further electrical issues or safety concerns. Address the problem as soon as possible.
6. How do I fix the B1400 code on a 2014 GMC Sierra?
Repairs may include replacing a blown fuse, repairing or replacing damaged wiring, ensuring proper ground connections, or replacing a faulty relay or control module.
7. How much does it cost to repair a B1400 code on a 2014 GMC Sierra?
The cost varies depending on the cause. Simple fixes like a fuse replacement may cost under $20, while more complex repairs like replacing a control module can exceed $500.
8. Can a dead battery cause the B1400 code on a 2014 GMC Sierra?
Yes, a weak or dead battery can cause voltage supply issues, potentially triggering the B1400 code. Ensure the battery is fully charged and functional.
9. What tools are needed to troubleshoot the B1400 code on a 2014 GMC Sierra?
You'll need a diagnostic scanner, a multimeter, and basic hand tools to inspect fuses, wiring, and relays.
10. Does the B1400 code reset automatically after repairs on a 2014 GMC Sierra?
In most cases, you’ll need to clear the code using an OBDII scanner after completing the repairs. If the problem persists, the code may reappear.
Discuss the causes and fixes for B1400 2014 GMC Sierra OBDII Code
Code B1400 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
