B13BF Mercury Code - Run/Start Input Circuit Short to Ground Or Open
Quick Answer
The Battery Energy Control Module (BECMB) provides battery voltage to the Restraints Control Module (RCM) and Occupant Classification System Module (OCSM). Common causes include Faulty Battery Energy Control Module (BECMB), Battery Energy Control Module (BECMB) harness is open or shorted, Battery Energy Control Module (BECMB) circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B13BF Mercury indicates Run/Start Input Circuit Short to Ground Or Open.
- Common causes
- Common causes include Faulty Battery Energy Control Module (BECMB), Battery Energy Control Module (BECMB) harness is open or shorted, Battery Energy Control Module (BECMB) circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B13BF Mercury Description
What are the Possible Causes of the DTC B13BF Mercury?
- Faulty Battery Energy Control Module (BECMB)
- Battery Energy Control Module (BECMB) harness is open or shorted
- Battery Energy Control Module (BECMB) circuit poor electrical connection
How to Fix the DTC B13BF Mercury?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B13BF Mercury code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B13BF Mercury code?
Need more information on how to fix the B13BF Mercury code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B13BF Mercury code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B13BF Mercury Code
1. What are the common symptoms of OBDII code B13BF in a Mercury vehicle?
- Common symptoms may include difficulty starting the engine, engine stalling, or the engine not starting at all.
2. What does the OBDII code B13BF "Run/Start Input Circuit Short to Ground Or Open" mean for a Mercury vehicle?
- This code indicates a problem with the circuit responsible for the run/start input, potentially due to a short to ground or an open circuit.
3. What can cause the OBDII code B13BF to appear in a Mercury vehicle?
- The code B13BF can be triggered by issues such as damaged wiring, a faulty ignition switch, or a malfunctioning starter relay.
4. How can I diagnose the OBDII code B13BF in my Mercury?
- Diagnosing the code may involve checking the wiring harness for damage, testing the ignition switch, and inspecting the starter relay for proper operation.
5. Can I drive my Mercury with the OBDII code B13BF present?
- It is not recommended to drive the vehicle with this code present, as it can lead to potential starting or stalling issues while driving.
6. How urgent is it to address the OBDII code B13BF in my Mercury?
- It is important to address this code promptly to avoid potential starting problems that can leave you stranded or cause further damage to the vehicle.
7. Are there any simple repairs I can attempt for the OBDII code B13BF in my Mercury?
- Simple repairs may include checking and repairing any damaged wiring, replacing the ignition switch if faulty, or swapping out the starter relay if needed.
8. Can a DIY enthusiast fix the OBDII code B13BF issue in a Mercury?
- Depending on the root cause of the problem, a knowledgeable DIY enthusiast may be able to address the issue by following repair guides or seeking assistance from a professional.
9. What are the potential risks of ignoring the OBDII code B13BF in my Mercury?
- Ignoring this code can lead to unpredictable starting issues, potential stalling while driving, and may result in costly repairs if left unattended.
10. How much can I expect to pay to fix the OBDII code B13BF in my Mercury at a repair shop?
- The cost of fixing the OBDII code B13BF can vary depending on the exact cause of the issue, but it may range from a few hundred to over a thousand dollars, including parts and labor.
Discuss the causes and fixes for B13BF Mercury OBDII Code
Code B13BF Mercury comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
