B1369 GMC - Ignition 0 Fault

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3    What is this?
Comments  |  Add Comment

B1369 GMC Possible Causes

  • Faulty Body Control Module (BCM)
  • Body Control Module (BCM) harness is open or shorted
  • Body Control Module (BCM) circuit poor electrical connection
  • Faulty Instrument Panel Cluster (IPC)

How do I fix code B1369 GMC

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Cost of diagnosing the B1369 GMC code

Labor: 1.0

The cost of diagnosing the B1369 GMC code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

Possible Symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

B1369 Gmc Description

The Diagnostic Trouble Code (DTC) B1369 will set if IGNITION 0 input is not active after IGNITION 3 input has been active for 20 seconds with the engine running. When DTC is present, multiple indicators on the instrument panel will illuminate and the vehicle will not start. A current DTC B1369 will clear when the fault is no longer present and the ignition switch is cycled. A history DTC B1369 clears when module ignition cycle counter reaches reset threshold, without a repeat of malfunction.
OBDII Code B1369 Gmc - Ignition 0 Fault - AutoCodes.com

B1369 GMC More Information

Need more information on how to fix the B1369 GMC code?
Get Access to Factory Service Manuals

Need more help?

Get the B1369 Gmc code diagnosed by a professional: Find a repair shop in your area

Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the B1369 Gmc code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧