AutoCodes – KIA – B1362 KIA

B1362 KIA Code - Front-Driver Seat Belt Pretensioner Resistance Too Low

Quick Answer

The Seat Belt Pretensioners (BPT) are located at both sides of the center pillar. Common causes include Faulty Front-Driver Seat Belt Pretensioner, Front-Driver Seat Belt Pretensioner harness is open or shorted, Front-Driver Seat Belt Pretensioner circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1362 KIA indicates Front-Driver Seat Belt Pretensioner Resistance Too Low.
Common causes: Common causes include Faulty Front-Driver Seat Belt Pretensioner, Front-Driver Seat Belt Pretensioner harness is open or shorted, Front-Driver Seat Belt Pretensioner circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 5,573

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 15, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1362 KIA Description

The Seat Belt Pretensioners (BPT) are located at both sides of the center pillar. The Seat Belt Pretensioner tightens seat belt before air bag deploys to protect the passenger from bumping against crush pad, steering wheel, and front window. In the Seat Belt Pretensioner, there are an ignition circuit and cylinder for rewinding belt. Gas chamber generates an expansive force of gases to push the piston in the cylinder to lock the seat belt. The Seat Belt Pretensioners circuit consists of the Supplemental Restraint System Control Module (SRSCM) and two Seat Belt Pretensioners. The SRSCM sets the Diagnostic Trouble Code (DTC) if it detects that the resistance of BPT squib is too high or low.

OBDII Code B1362 KIA - Front-Driver Seat Belt Pretensioner Resistance Too Low - AutoCodes.com — B1362 KIA Code - Front-Driver Seat Belt Pretensioner Resistance Too Low

What does this mean?

What are the Possible Causes of the DTC B1362 KIA?

Faulty Front-Driver Seat Belt Pretensioner
Front-Driver Seat Belt Pretensioner harness is open or shorted
Front-Driver Seat Belt Pretensioner circuit poor electrical connection
Faulty Supplemental Restraint System Control Module (SRSCM)

How to Fix the DTC B1362 KIA?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1362 KIA code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1362 KIA code?

Need more information on how to fix the B1362 KIA code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1362 KIA code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1362 KIA Code

1. What are the common symptoms of OBDII code B1362 for Kia, indicating Front-Driver Seat Belt Pretensioner Resistance Too Low?

The common symptoms include the airbag warning light illuminating on the dashboard and a diagnostic trouble code (DTC) being stored in the vehicle's computer.

2. What are the potential causes of OBDII code B1362 in a Kia related to Front-Driver Seat Belt Pretensioner Resistance Too Low?

Possible causes may include a faulty seat belt pretensioner, damaged wiring or connectors in the seat belt system, or a problem with the airbag control module.

3. How serious is the issue of Front-Driver Seat Belt Pretensioner Resistance Too Low indicated by OBDII code B1362 in a Kia?

This issue is serious as it can affect the proper function of the seat belt pretensioner, which is crucial for occupant safety in the event of a collision.

4. Can I continue driving my Kia with OBDII code B1362 indicating Front-Driver Seat Belt Pretensioner Resistance Too Low?

It is not recommended to drive the vehicle with this issue unresolved, as it can compromise the effectiveness of the seat belt pretensioner in case of an accident.

5. How can I diagnose and repair OBDII code B1362 for Front-Driver Seat Belt Pretensioner Resistance Too Low in my Kia?

Diagnosis typically involves inspecting the seat belt pretensioner, checking wiring and connectors for damage, and testing the airbag control module. Repairs may involve replacing the faulty components.

6. Are there any DIY repair tips for addressing OBDII code B1362 in a Kia related to Front-Driver Seat Belt Pretensioner Resistance Too Low?

DIY repair is not recommended for this issue due to the safety implications involved. It is best to have a qualified technician diagnose and repair the problem.

7. How much does it cost to fix OBDII code B1362 indicating Front-Driver Seat Belt Pretensioner Resistance Too Low in a Kia?

The cost of repairs can vary depending on the specific cause of the issue. It is advisable to obtain a diagnosis from a professional to determine the exact cost.

8. Can resetting the OBDII system clear the B1362 code for Front-Driver Seat Belt Pretensioner Resistance Too Low in a Kia?

Resetting the system may temporarily clear the code, but it will likely reappear until the underlying issue is addressed and repaired.

9. Is it possible for OBDII code B1362 to be a false alarm in a Kia regarding Front-Driver Seat Belt Pretensioner Resistance Too Low?

While rare, false alarms can occur. It is still important to have the system checked by a professional to ensure the safety features are functioning properly.

10. How can I prevent OBDII code B1362 related to Front-Driver Seat Belt Pretensioner Resistance Too Low in my Kia from occurring in the future?

Regular maintenance and inspections of the seat belt system, including the pretensioner, can help prevent issues that trigger this code.

Discuss the causes and fixes for B1362 KIA OBDII Code

Submit a New Comment

Code B1362 KIA comments

No comments found for this page.

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.