AutoCodes – GMC – B1362 GMC

B1362 GMC Code - Driver Belt Pretensioner Resistance Too High

Quick Answer

When the ignition switch is turned to ON, the Sensing and Diagnostic Module (SDM) will perform turn-on test to diagnose critical malfunctions within SDM itself. Common causes include Faulty Driver Belt Pretensioner, Driver Belt Pretensioner harness is open or shorted, Driver Belt Pretensioner circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

What it means: B1362 GMC indicates Driver Belt Pretensioner Resistance Too High.
Common causes: Common causes include Faulty Driver Belt Pretensioner, Driver Belt Pretensioner harness is open or shorted, Driver Belt Pretensioner circuit poor electrical connection.
Severity: High - diagnose this code as soon as possible.
Can I drive?: Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 953

How popular is this code, among other codes? Low

Repair Importance Level

Urgent (Diagnose now) (3 / 3)

Repair Difficulty Level

Advanced (Pro) (3 / 3)

What is this?

Table of contents Created and updated by William Orellana on Mar 15, 2019

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1362 GMC Description

When the ignition switch is turned to ON, the Sensing and Diagnostic Module (SDM) will perform turn-on test to diagnose critical malfunctions within SDM itself.
Upon passing these test ignition and deployment loop voltages are measured to ensure that they are within their normal voltage ranges. The SDM monitors the voltages at the driver low and the passenger low to detect shorts to ground or voltage in the deploy loops.
The SDM checks the wiring connection to the driver belt pretensioner by letting the infinitesimal current flow through the internal circuit and verify the resistance.

OBDII Code B1362 GMC - Driver Belt Pretensioner Resistance Too High - AutoCodes.com — B1362 GMC Code - Driver Belt Pretensioner Resistance Too High

What does this mean?

What are the Possible Causes of the DTC B1362 GMC?

Faulty Driver Belt Pretensioner
Driver Belt Pretensioner harness is open or shorted
Driver Belt Pretensioner circuit poor electrical connection

How to Fix the DTC B1362 GMC?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1362 GMC code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1362 GMC code?

Need more information on how to fix the B1362 GMC code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1362 GMC code diagnosed by a professional: Find a repair shop in your area

Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service

Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.

Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1362 GMC Code

1. What are the common symptoms of OBDII code B1362 GMC (Driver Belt Pretensioner Resistance Too High)?

- The common symptoms include the airbag warning light illuminating on the dashboard and a possible message indicating a problem with the driver's seat belt pretensioner.

2. What are the possible causes of OBDII code B1362 GMC?

- The code B1362 GMC can be triggered by issues such as a faulty driver's seat belt pretensioner, loose or corroded wiring connections, or a damaged seat belt mechanism.

3. How serious is OBDII code B1362 GMC?

- This code indicates a potential issue with the driver's seat belt pretensioner system, which is a crucial safety component. It is important to address this problem promptly to ensure the proper functioning of the seat belt in case of an accident.

4. What should I do if I encounter OBDII code B1362 GMC?

- If you encounter code B1362 GMC, it is recommended to have the vehicle inspected by a qualified mechanic to diagnose the specific cause of the issue and perform any necessary repairs.

5. Can I continue driving my vehicle with OBDII code B1362 GMC present?

- It is not advisable to continue driving the vehicle with the B1362 code active, as it indicates a potential problem with the driver's seat belt pretensioner system, which is a critical safety component.

6. How can OBDII code B1362 GMC be repaired?

- Repairing OBDII code B1362 GMC typically involves diagnosing the root cause of the issue, which may include replacing a faulty driver's seat belt pretensioner, repairing wiring connections, or addressing any other underlying problems.

7. Is it safe to reset the OBDII code B1362 GMC without fixing the underlying issue?

- Resetting the code without addressing the underlying problem may temporarily turn off the warning light, but it will not fix the issue with the driver's seat belt pretensioner system. It is crucial to repair the problem to ensure proper safety functionality.

8. How much does it cost to fix OBDII code B1362 GMC?

- The cost of fixing OBDII code B1362 GMC can vary depending on the specific cause of the issue, the parts needed for repair, and the labor rates. It is best to consult with a mechanic for an accurate estimate.

9. Can I diagnose and repair OBDII code B1362 GMC on my own?

- Diagnosing and repairing OBDII code B1362 GMC may require specialized tools and knowledge of automotive safety systems. It is recommended to seek professional help to properly diagnose and repair the issue.

10. Will OBDII code B1362 GMC cause my vehicle to fail an emissions test?

- OBDII code B1362 GMC is related to the airbag system and not emissions. However, it is important to address this code for safety reasons, even if it does not directly impact emissions testing.