AutoCodes
 
OBDII Code List
 
B1352 MERCURY

B1352 MERCURY - Ignition Key-In Circuit Failure

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3   
Comments  |  Add Comment

Possible causes

  • Faulty Ignition Key-In Switch (Part of the ignition switch)
  • Ignition Key-In Switch harness is open or shorted
  • Ignition Key-In Switch circuit poor electrical connection
  • Faulty Smart Junction Box (SJB)

Possible symptoms

  • Engine Light ON (or Service Engine Soon Warning Light)

B1352 Mercury Description

The Instrument Cluster (IC) receives the key-in-ignition warning status from the Smart Junction Box (SJB) over the Medium Speed Controller Area Network (MS-CAN). The key-in-ignition warning switch (part of the ignition switch) is hardwired to the SJB through the circuit. When the key is inserted into the ignition lock cylinder, the key-in-ignition switch closes and supplies voltage to the SJB. The SJB monitors the door ajar input from the LH front door and the key-in-ignition switch status. When the key is inserted into the ignition lock cylinder and the LH front door is open or ajar, the SJB sends the IC a chime request message to sound the key-in-ignition warning chime. The headlamps on warning chime sound when the driver door is opened with the ignition switch in the OFF position, the key is not in the ignition lock cylinder, and the headlamp switch is in the PARK or HEADLAMP ON position.
OBDII Code B1352 Mercury - Ignition Key-In Circuit Failure - AutoCodes.com

Need more help?

Get the B1352 Mercury code diagnosed by a professional: Find a repair shop in your area

Related Information

B1352 MERCURY Comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the B1352 Mercury code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧