AutoCodes.com | All About OBDII Engine Codes
AutoCodes - Lincoln - B1352 LINCOLN

B1352 LINCOLN Code - Ignition Key-In Circuit Failure

- Code Popularity: 3,153 Views
- Repair Importance Level: 3/3
- Repair Difficulty Level: 3/3
Table of contents
By AutoCodes.com - Updated Mar 15, 2019
Share on Facebook   Share on Twitter   Share on Linkedin

|B1352 LINCOLN code possible causes

  • Faulty Ignition Key-In Switch (Part of the ignition switch)
  • Ignition Key-In Switch harness is open or shorted
  • Ignition Key-In Switch circuit poor electrical connection
  • Faulty Smart Junction Box (SJB)

|How do I fix code B1352 LINCOLN code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

Does your car have Safety Recalls? → Check here

|Cost of diagnosing B1352 LINCOLN code

Labor: 1.0

The cost of diagnosing the B1352 LINCOLN code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.

|What are B1352 LINCOLN code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|B1352 LINCOLN code description

The Instrument Cluster (IC) receives the key-in-ignition warning status from the Smart Junction Box (SJB) over the Medium Speed Controller Area Network (MS-CAN). The key-in-ignition warning switch (part of the ignition switch) is hardwired to the SJB through the circuit. When the key is inserted into the ignition lock cylinder, the key-in-ignition switch closes and supplies voltage to the SJB. The SJB monitors the door ajar input from the LH front door and the key-in-ignition switch status. When the key is inserted into the ignition lock cylinder and the LH front door is open or ajar, the SJB sends the IC a chime request message to sound the key-in-ignition warning chime. The headlamps on warning chime sound when the driver door is opened with the ignition switch in the OFF position, the key is not in the ignition lock cylinder, and the headlamp switch is in the PARK or HEADLAMP ON position.

OBDII Code b1352 lincoln - Ignition Key-In Circuit Failure - AutoCodes.com
B1352 LINCOLN Code - Ignition Key-In Circuit Failure

|Need more information with the B1352 LINCOLN code?

Need more information on how to fix the B1352 LINCOLN code? Get Access to Factory Service Manuals

|Need help with a B1352 LINCOLN code?

Get the b1352 lincoln code diagnosed by a professional: Find a repair shop in your area

|B1352 LINCOLN code comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the b1352 lincoln code? Have you replaced any parts?
Any information is appreciated. Thanks