B1352 Cadillac Code - Passenger Front Airbag Resistance Too Low
Quick Answer
When the ignition switch is turned to ON, the Sensing and Diagnostic Module (SDM) will perform turn-on test to diagnose critical malfunctions within SDM itself. Common causes include Faulty Passenger Front Airbag, Passenger Front Airbag harness is open or shorted, Passenger Front Airbag circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1352 Cadillac indicates Passenger Front Airbag Resistance Too Low.
- Common causes
- Common causes include Faulty Passenger Front Airbag, Passenger Front Airbag harness is open or shorted, Passenger Front Airbag circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1352 Cadillac Description
Upon passing these test ignition and deployment loop voltages are measured to ensure that they are within their normal voltage ranges. The SDM monitors the voltages at the driver low and the passenger low to detect shorts to ground or voltage in the deploy loops.
The SDM checks the wiring connection to the passenger airbag module by letting the infinitesimal current flow through the internal circuit and verify the resistance.
What are the Possible Causes of the DTC B1352 Cadillac?
- Faulty Passenger Front Airbag
- Passenger Front Airbag harness is open or shorted
- Passenger Front Airbag circuit poor electrical connection
How to Fix the DTC B1352 Cadillac?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1352 Cadillac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1352 Cadillac code?
Need more information on how to fix the B1352 Cadillac code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1352 Cadillac code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1352 Cadillac Code
1. What are the common symptoms of OBDII code B1352 in a Cadillac related to the passenger front airbag?
- The common symptoms include the airbag warning light staying illuminated on the dashboard and a message indicating a fault with the passenger front airbag system.
2. What are the possible causes of OBDII code B1352 indicating "Passenger Front Airbag Resistance Too Low" in a Cadillac?
- The code B1352 can be triggered by issues such as a faulty passenger front airbag sensor, damaged wiring harness, or a problem with the airbag control module.
3. How serious is the OBDII code B1352 in a Cadillac indicating low resistance in the passenger front airbag system?
- This code is serious as it indicates a potential safety issue with the passenger front airbag system, which may prevent the airbag from deploying properly in the event of a collision.
4. What should I do if I encounter OBDII code B1352 in my Cadillac?
- If you see the B1352 code, it is recommended to have the airbag system inspected and repaired by a qualified mechanic to ensure the safety of the vehicle occupants.
5. Can I continue driving my Cadillac with the OBDII code B1352 related to the passenger front airbag resistance being too low?
- It is not advisable to continue driving the vehicle with this code active, as it indicates a potential safety risk with the passenger front airbag system.
6. How can I diagnose and repair OBDII code B1352 in a Cadillac indicating low resistance in the passenger front airbag?
- Diagnosing and repairing the B1352 code may involve testing the passenger front airbag sensor, checking the wiring for damage, and resetting the airbag control module after the issue is resolved.
7. Are there any DIY tips for troubleshooting OBDII code B1352 in a Cadillac?
- While some basic checks like inspecting the airbag system wiring for visible damage can be done, diagnosing and repairing the B1352 code usually requires specialized tools and knowledge best left to professional mechanics.
8. How much does it typically cost to repair OBDII code B1352 indicating low resistance in the passenger front airbag system of a Cadillac?
- The repair cost for B1352 can vary depending on the specific cause of the issue, but it may involve expenses for parts replacement, labor, and diagnostic services from a certified mechanic.
9. Can resetting the OBDII system clear the B1352 code related to the passenger front airbag in a Cadillac?
- Resetting the OBDII system may clear the code temporarily, but if the underlying issue causing the B1352 code is not addressed, the code is likely to reappear.
10. How can I prevent future occurrences of OBDII code B1352 in my Cadillac's passenger front airbag system?
- Regularly maintaining the airbag system, avoiding physical damage to the wiring, and promptly addressing any airbag warning lights can help prevent the recurrence of the B1352 code and ensure the proper functioning of the passenger front airbag.
Discuss the causes and fixes for B1352 Cadillac OBDII Code
Code B1352 Cadillac comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
