B1346 Hyundai Code - Driver-Side Air Bag Module First Stage Resistance High
Quick Answer
The Driver Air Bag Module located at the center of steering wheel protects the driver by reducing the impact of a collision. Common causes include Faulty Driver-Side Air Bag Module, Driver-Side Air Bag Module harness is open or shorted, Driver-Side Air Bag Module circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1346 Hyundai indicates Driver-Side Air Bag Module First Stage Resistance High.
- Common causes
- Common causes include Faulty Driver-Side Air Bag Module, Driver-Side Air Bag Module harness is open or shorted, Driver-Side Air Bag Module circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1346 Hyundai Description
What are the Possible Causes of the DTC B1346 Hyundai?
- Faulty Driver-Side Air Bag Module
- Driver-Side Air Bag Module harness is open or shorted
- Driver-Side Air Bag Module circuit poor electrical connection
- Faulty Clock Spring
- Faulty Supplemental Restraint System Control Module (SRSCM)
How to Fix the DTC B1346 Hyundai?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1346 Hyundai code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1346 Hyundai code?
Need more information on how to fix the B1346 Hyundai code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1346 Hyundai code diagnosed by a professional: Find a repair shop in your area
Precautions for SRS “AIR BAG” and “SEAT BELT PRE-TENSIONER” Service
- Never probe the electrical connectors on air bag, side air curtain modules or seat belts.
- Never disassemble or tamper with safety belt buckle/retractor pretensioners, adaptive load limiting retractors, safety belt inflators, or probe the electrical connectors.
- Do not use electrical test equipment to check SRS circuits unless instructed to in this Service Manual.
- Before servicing the SRS, turn ignition switch OFF, disconnect both battery cables and wait at least 3 minutes. For approximately 3 minutes after the cables are removed, it is still possible for the air bag and seat belt pre-tensioner to deploy. Therefore, do not work on any SRS connectors or wires until at least 3 minutes have passed.
Failure to follow this instruction may result in the accidental deployment of these modules, which increases the risk of serious personal injury or death.
Frequently Asked Questions about B1346 Hyundai Code
1. What are common symptoms of OBDII code B1346 in a Hyundai related to the driver-side airbag module first stage resistance being high?
The common symptoms include the airbag warning light illuminating on the dashboard, potential non-deployment of the driver-side airbag in a collision, and a diagnostic trouble code (DTC) stored in the vehicle's computer system.
2. What are some possible causes of OBDII code B1346 in a Hyundai?
Possible causes of this code include a faulty driver-side airbag module, damaged wiring or connectors in the airbag system, or a problem with the airbag control module.
3. How serious is OBDII code B1346 in a Hyundai?
This code indicates a potential safety issue with the driver-side airbag system, which can compromise the protection of the driver in the event of a collision. It is important to address this issue promptly to ensure the proper functioning of the airbag system.
4. Can I continue driving my Hyundai if OBDII code B1346 is present?
It is not recommended to drive the vehicle if the airbag warning light is on and OBDII code B1346 is stored. The driver-side airbag may not deploy in a collision, increasing the risk of injury to the driver.
5. How can OBDII code B1346 in a Hyundai be diagnosed?
Diagnosing this code typically involves using a diagnostic scan tool to retrieve the DTCs from the vehicle's computer system. Further testing may be needed to pinpoint the exact cause of the high resistance in the driver-side airbag module.
6. What is the repair process for OBDII code B1346 in a Hyundai?
The repair process may involve inspecting and repairing any damaged wiring or connectors in the airbag system, replacing the driver-side airbag module if necessary, and clearing the DTC from the vehicle's computer system.
7. Can I reset OBDII code B1346 in a Hyundai myself?
While you may be able to clear the DTC using a diagnostic scan tool, it is important to address the underlying issue causing the code before resetting it. It is recommended to have the necessary repairs performed by a qualified technician.
8. Are there any safety precautions I should take if OBDII code B1346 is present in my Hyundai?
It is important to avoid tampering with the airbag system if you are not trained to do so, as this can result in accidental airbag deployment or other safety hazards. Seek professional help to address the issue safely.
9. How much does it cost to repair OBDII code B1346 in a Hyundai?
The cost of repairing this code can vary depending on the exact cause of the issue and the required repairs. It is recommended to consult with a qualified technician for an accurate diagnosis and cost estimate.
10. Can OBDII code B1346 in a Hyundai be prevented?
Regular maintenance and inspections of the airbag system can help prevent issues like high resistance in the driver-side airbag module. Promptly addressing any warning lights or unusual symptoms can also help prevent more serious problems down the line.
Discuss the causes and fixes for B1346 Hyundai OBDII Code
-
your information is not completed because it does not show any way to check any think is ok to mention the warnings which is all you say have to be more explicit on subject.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
