B1327 2014 GMC Sierra Code - Device Power 1 Circuit Low
Quick Answer
The vehicle control modules or sensors monitor the system voltage to verify the system voltage is within the normal operating range. Common causes include Low battery voltage, Faulty Control Module, Control Module harness is open or shorted. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1327 2014 GMC Sierra indicates Device Power 1 Circuit Low.
- Common causes
- Common causes include Low battery voltage, Faulty Control Module, Control Module harness is open or shorted.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1327 2014 GMC Sierra Description
What are the Possible Causes of the DTC B1327 2014 GMC Sierra?
- Low battery voltage
- Faulty Control Module
- Control Module harness is open or shorted
- Control Module circuit poor electrical connection
How to Fix the DTC B1327 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1327 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1327 2014 GMC Sierra code?
Need more information on how to fix the B1327 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1327 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1327 2014 GMC Sierra Code
1. What does OBDII code B1327 mean on a 2014 GMC Sierra?
Code B1327 indicates "Device Power 1 Circuit Low," meaning there is an issue with the voltage supplied to a specific control module or device in the vehicle.
2. What are the common symptoms of code B1327 on a 2014 GMC Sierra?
Common symptoms include warning lights on the dash, malfunctioning electrical components, or intermittent power issues in certain systems.
3. What causes the B1327 code to appear on a 2014 GMC Sierra?
The most common causes are low battery voltage, corroded or loose electrical connections, or a failing control module.
4. Can a weak battery trigger code B1327 on a GMC Sierra?
Yes, a weak or failing battery can cause voltage drops that trigger the B1327 code.
5. How do I diagnose code B1327 on a 2014 GMC Sierra?
Start by checking the battery voltage and condition, inspect fuse connections, and look for loose, corroded, or damaged wiring in the affected circuit.
6. Can a damaged ground connection cause code B1327?
Yes, a poor or damaged ground connection can disrupt the circuit and result in a low-power fault.
7. Is it safe to drive with code B1327 active on my 2014 GMC Sierra?
While the vehicle may still function, the code indicates an electrical issue that could lead to intermittent failures or further damage if not addressed.
8. How do I fix code B1327 on a 2014 GMC Sierra?
Repairs may include cleaning or tightening electrical connections, replacing damaged wiring, or replacing a faulty battery or control module.
9. Can a blown fuse cause the B1327 code on a GMC Sierra?
Yes, a blown fuse in the affected circuit can result in insufficient power and trigger the code.
10. Will clearing the B1327 code solve the problem permanently?
No, clearing the code will only temporarily remove it. The underlying issue must be diagnosed and repaired to prevent the code from returning.
Discuss the causes and fixes for B1327 2014 GMC Sierra OBDII Code
Code B1327 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
