B1325:07 Cadillac Code - Control Module Power Circuit High Voltage
Quick Answer
The vehicle control modules or sensors monitor the system voltage to verify the system voltage is within the normal operating range. Common causes include Faulty Control Module Power, Control Module Power harness is open or shorted, Control Module Power circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B1325:07 Cadillac indicates Control Module Power Circuit High Voltage.
- Common causes
- Common causes include Faulty Control Module Power, Control Module Power harness is open or shorted, Control Module Power circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B1325:07 Cadillac Description
What are the Possible Causes of the DTC B1325:07 Cadillac?
- Faulty Control Module Power
- Control Module Power harness is open or shorted
- Control Module Power circuit poor electrical connection
How to Fix the DTC B1325:07 Cadillac?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1325:07 Cadillac code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1325:07 Cadillac code?
Need more information on how to fix the B1325:07 Cadillac code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1325:07 Cadillac code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1325:07 Cadillac Code
1. What does the OBD-II code B1325:07 mean on a Cadillac?
The code B1325:07 indicates a "Control Module Power Circuit High Voltage" issue, meaning the control module is detecting a voltage level higher than its operating range.
2. What are the common symptoms of code B1325:07 on a Cadillac?
Symptoms may include warning lights on the dashboard, intermittent electrical issues, trouble starting the vehicle, or certain systems not functioning properly.
3. What causes the B1325:07 code on a Cadillac?
Common causes include a faulty control module, loose or corroded battery connections, issues with the alternator or voltage regulator, or a wiring short creating excessive voltage.
4. Is the B1325:07 code dangerous to drive with on a Cadillac?
Driving with this code can lead to further electrical issues or damage to components. It’s best to address the issue promptly to avoid potential safety concerns or more costly repairs.
5. How can I diagnose the B1325:07 code on my Cadillac?
Start by checking the battery voltage, inspecting battery terminals for corrosion, and verifying the alternator output. If no issues are found, examine the wiring and connectors leading to the control module.
6. Can a failing alternator cause the B1325:07 code on a Cadillac?
Yes, a failing alternator or faulty voltage regulator can cause high voltage output, triggering this code.
7. What tools are needed to troubleshoot the B1325:07 code?
You’ll need a digital multimeter to measure voltage levels and an OBD-II scanner to read and clear the code.
8. How do I fix the B1325:07 code on a Cadillac?
Repairs may include cleaning or tightening battery terminals, repairing damaged wiring, replacing the alternator or voltage regulator, or replacing the faulty control module.
9. Can a weak battery trigger the B1325:07 code?
While a weak battery typically causes low voltage issues, loose or corroded battery connections could result in voltage spikes, potentially triggering this code.
10. Do I need to reprogram the control module after fixing the B1325:07 code?
In some cases, if the control module was replaced, reprogramming or recalibration may be necessary to ensure proper operation. Check the service manual or consult a professional mechanic.
Discuss the causes and fixes for B1325:07 Cadillac OBDII Code
Code B1325:07 Cadillac comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
