AutoCodes – Generic – B1323

B1323 Code - Door Ajar Lamp Circuit Failure

Quick Answer

The Body Control Module (BCM) monitors the Door Ajar Lamp. Common causes include Faulty Door Ajar Lamp, Door Ajar Lamp harness is open or shorted, Door Ajar Lamp circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: B1323 indicates Door Ajar Lamp Circuit Failure.
Common causes: Common causes include Faulty Door Ajar Lamp, Door Ajar Lamp harness is open or shorted, Door Ajar Lamp circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 23,407

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 29, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1323 Description

The Body Control Module (BCM) monitors the Door Ajar Lamp. The BCM sets the OBDII code when the Door Ajar Lamp is not to factory specifications.

OBDII Code B1323 - Door Ajar Lamp Circuit Failure - AutoCodes.com — B1323 Code - Door Ajar Lamp Circuit Failure

What does this mean?

What are the Possible Causes of the DTC B1323?

Faulty Door Ajar Lamp
Door Ajar Lamp harness is open or shorted
Door Ajar Lamp circuit poor electrical connection
Faulty Body Control Module (BCM)

How to Fix the DTC B1323?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1323 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1323 code?

Need more information on how to fix the B1323 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1323 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1323 Code

1. What are the common symptoms of OBDII code B1323 (Door Ajar Lamp Circuit Failure)?

- The common symptoms include the door ajar indicator staying on even when the door is properly closed, interior lights not turning off, and potential issues with power door locks.

2. What are the typical causes of code B1323 (Door Ajar Lamp Circuit Failure)?

- The code is often triggered by a faulty door ajar switch, a wiring issue in the door circuit, a defective body control module (BCM), or a malfunction in the instrument cluster.

3. How can I diagnose the cause of OBDII code B1323 (Door Ajar Lamp Circuit Failure)?

- Diagnosing the issue involves checking the door ajar switches, inspecting the wiring for any damage or corrosion, testing the continuity of the circuit, and using a scan tool to communicate with the BCM.

4. Is it safe to drive my vehicle with OBDII code B1323 (Door Ajar Lamp Circuit Failure) active?

- While the code itself does not affect the drivability of the vehicle, it can lead to battery drain if the interior lights remain on constantly. It is advisable to address the issue promptly.

5. Can I repair OBDII code B1323 (Door Ajar Lamp Circuit Failure) myself?

- Repairing the issue may involve replacing a faulty door ajar switch, repairing damaged wiring, resetting the BCM, or seeking professional help if the problem lies within the BCM or instrument cluster.

6. Are there any quick fixes or temporary solutions for code B1323 (Door Ajar Lamp Circuit Failure)?

- In some cases, manually pressing and releasing the door a few times may help reset the door ajar switch temporarily, but it is recommended to address the root cause for a permanent solution.

7. Will resetting the OBDII system clear code B1323 (Door Ajar Lamp Circuit Failure)?

- Resetting the OBDII system may temporarily clear the code, but if the underlying issue persists, the code is likely to return once the system detects the problem again.

8. Can a malfunctioning door ajar switch cause other electrical issues in the vehicle?

- Yes, a faulty door ajar switch can affect other electrical components like interior lights, power door locks, and alarm systems, leading to potential malfunctions in these systems.

9. What is the typical cost to repair OBDII code B1323 (Door Ajar Lamp Circuit Failure)?

- The cost of repair can vary depending on the cause of the issue and whether you choose to DIY or seek professional help. It may range from a few dollars for a replacement switch to a few hundred dollars for more complex repairs.

10. How long does it usually take to fix OBDII code B1323 (Door Ajar Lamp Circuit Failure)?

- The repair time can vary based on the complexity of the issue and your experience level. Simple fixes like replacing a switch may take less than an hour, while more involved repairs could take several hours to complete.