AutoCodes - Lincoln - B12A0 LINCOLN

B12A0 LINCOLN Code - Passenger Blend Door Actuator Feedback Circuit Open Or Shorted To Battery Voltage

Repair Importance Level: 3/3
Repair Difficulty Level: 3/3
Table of contents

|B12A0 LINCOLN code possible causes

  • Stuck or damaged linkage or door
  • Faulty Blend Door Actuator
  • Blend Door Actuator harness is open or shorted
  • Blend Door Actuator circuit poor electrical connection
  • Electronic Manual Temperature Control (EMTC) Module
  • Electronic Automatic Temperature Control (EATC) Module

|How do I fix the B12A0 LINCOLN code?

Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.

|Cost of diagnosing the B12A0 LINCOLN code

Labor: 1.0

The cost of diagnosing the B12A0 LINCOLN code is 1.0 hour of labor. The auto repair's diagnosis time and labor rates vary by location, vehicle's make and model, and even your engine type. Most auto repair shops charge between $75 and $150 per hour.

|What are B12A0 LINCOLN code possible symptoms?

  • Engine Light ON (or Service Engine Soon Warning Light)

|B12A0 LINCOLN code description

Under normal operation, to rotate the blend door actuator clockwise, the Electronic Manual Temperature Control (EMTC) Module or Electronic Automatic Temperature Control (EATC) Module supplies voltage to the blend door actuator motors through the door actuator feed A circuits and supplies ground through the door actuator feed B circuits. To rotate the blend door actuator counterclockwise, the EMTC module or EATC module reverses the voltage and ground circuits.
The blend door actuator feedback resistors are supplied a ground from the EMTC module or EATC module by the blend door actuator return circuits and a 5-volt reference voltage on the blend door actuator reference circuits. The EMTC module or EATC module reads the voltage on the blend door actuator feedback circuits to determine the blend door actuator position by the position of the actuator feedback resistor wiper arm.
OBDII Code B12a0 Lincoln - Passenger Blend Door Actuator Feedback Circuit Open Or Shorted To Battery Voltage - AutoCodes.com

|Need more information with the B12A0 LINCOLN code?

Need more information on how to fix the B12A0 LINCOLN code? Get Access to Factory Service Manuals

|Need help with a B12A0 LINCOLN code?

Get the B12a0 Lincoln code diagnosed by a professional: Find a repair shop in your area

|B12A0 LINCOLN code comments

Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the B12a0 Lincoln code? Have you replaced any parts?
Any information is appreciated. Thanks
Top ⇧
Repair Importance Level: 3
 
1=Low 2=Medium 3=High What is this?
Repair Difficulty Level: 3
 
1=Easy 2=Moderate 3=Hard What is this?