Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
B1299-11 PTS SENSOR 12 CIRCUIT SHORT TO GROUND
B1299-12 PTS SENSOR 12 CIRCUIT SHORT TO BATTERY
B1299-25 PTS SENSOR 12 SIGNAL SHAPE / WAVEFORM FAILURE
B1299-92 PTS SENSOR 12 PERFORMANCE OR INCORRECT OPERATION
The cost of diagnosing the B1299 code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
The Park Assist Sensors (PTS) are ultrasonic transceivers that are completely controlled by the Park Assist Module. The sensors transmit and receive ultrasonic signals. Each sensor has a voltage, signal, and return the circuit to the module. The sensors communicate with the Park Assist Module using a dedicated serial bus communication circuit. The Park Assist Module monitors the PTS Sensor when the vehicle in reverse and during the self-test while the vehicle is in drive between 18 km/h (11 mph) and 40 km/h (25 mph). The Park Assist Module sets the OBDII code when the Park Assist Sensor Signal circuit is not to factory specifications.
Need more information on how to fix the B1299 code? Get Access to Factory Service Manuals
Get the B1299 code diagnosed by a professional: Find a repair shop in your area
Help us improve AutoCodes.com. Leave a comment below or tell us if the information above helps you fix the code. What are the symptoms on your vehicle for the B1299 code? Have you replaced any parts?
Any information is appreciated. Thanks