AutoCodes – Jeep – B1296 Jeep

B1296 Jeep Code - Park Assist Sensor 9

Quick Answer

The Park Assist Sensors (PTS) are ultrasonic transceivers that are completely controlled by the Park Assist Module. Common causes include Faulty Park Assist Sensor 9, Park Assist Sensor 9 harness is open or shorted, Park Assist Sensor 9 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

What it means: B1296 Jeep indicates Park Assist Sensor 9.
Common causes: Common causes include Faulty Park Assist Sensor 9, Park Assist Sensor 9 harness is open or shorted, Park Assist Sensor 9 circuit poor electrical connection.
Severity: Moderate - service should be scheduled soon.
Can I drive?: The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,271

How popular is this code, among other codes? Low

Repair Importance Level

Moderate (Service soon) (2 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 29, 2024

Description
Possible Causes
How To Fix
Tech Notes
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1296 Jeep Description

The Park Assist Sensors (PTS) are ultrasonic transceivers that are completely controlled by the Park Assist Module. The sensors transmit and receive ultrasonic signals. Each sensor has a voltage, signal, and return the circuit to the module. The sensors communicate with the Park Assist Module using a dedicated serial bus communication circuit. The Park Assist Module monitors the PTS Sensor when the vehicle in reverse and during the self-test while the vehicle is in drive between 18 km/h (11 mph) and 40 km/h (25 mph). The Park Assist Module sets the OBDII code when the Park Assist Sensor Signal circuit is not to factory specifications.

OBDII Code B1296 Jeep - Park Assist Sensor 9 - AutoCodes.com — B1296 Jeep Code - Park Assist Sensor 9

What does this mean?

What are the Possible Causes of the DTC B1296 Jeep?

Faulty Park Assist Sensor 9
Park Assist Sensor 9 harness is open or shorted
Park Assist Sensor 9 circuit poor electrical connection
Faulty Park Assist Module

How to Fix the DTC B1296 Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What does this mean?

Code Tech Notes

B1296-11 PTS SENSOR 9 CIRCUIT SHORT TO GROUND
B1296-12 PTS SENSOR 9 CIRCUIT SHORT TO BATTERY
B1296-25 PTS SENSOR 9 SIGNAL SHAPE / WAVEFORM FAILURE
B1296-92 PTS SENSOR 9 PERFORMANCE OR INCORRECT OPERATION

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1296 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1296 Jeep code?

Need more information on how to fix the B1296 Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1296 Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1296 Jeep Code

1. What does OBDII code B1296 for a Jeep Park Assist Sensor 9 mean?

- OBDII code B1296 indicates a fault with Park Assist Sensor 9 in a Jeep's parking assistance system.

2. What are the common symptoms of a B1296 code in a Jeep?

- Common symptoms include the malfunction of Park Assist Sensor 9, leading to inaccurate or no park assist warnings.

3. What are the possible causes of a B1296 code in a Jeep?

- The B1296 code in a Jeep may be caused by a faulty Park Assist Sensor 9, wiring issues, or a problem with the control module.

4. How can I diagnose a B1296 code related to Park Assist Sensor 9 in my Jeep?

- Diagnosing a B1296 code involves inspecting Park Assist Sensor 9, checking the wiring for damage, and using an OBDII scanner to read the code.

5. Can I still drive my Jeep with a B1296 code for Park Assist Sensor 9?

- It is generally safe to drive with a B1296 code, but the park assist system may not function correctly, so be cautious when parking.

6. How can I repair a B1296 code in my Jeep related to Park Assist Sensor 9?

- Repairing a B1296 code typically involves replacing Park Assist Sensor 9, repairing any damaged wiring, or reprogramming the control module.

7. Are there any DIY tips for fixing a B1296 code in a Jeep?

- DIY tips include checking the sensor connections, ensuring the sensor is clean and free from obstructions, and inspecting the wiring for damage.

8. Will resetting the OBDII code B1296 fix the issue with Park Assist Sensor 9 in my Jeep?

- Resetting the code may temporarily clear the warning, but if the underlying issue with Park Assist Sensor 9 is not fixed, the code is likely to reappear.

9. Can extreme weather conditions affect the performance of Park Assist Sensor 9 in a Jeep and trigger a B1296 code?

- Yes, extreme weather conditions like heavy rain, snow, or extreme temperatures can impact the performance of the sensor and potentially trigger a B1296 code.

10. Is it recommended to seek professional help for diagnosing and repairing a B1296 code in a Jeep?

- If you are not familiar with automotive diagnostics and repairs, it is advisable to seek professional help to accurately diagnose and fix the issue related to the B1296 code in your Jeep.