B1293 Jeep Code - Park Assist Sensor 6
Quick Answer
The Park Assist Sensors (PTS) are ultrasonic transceivers that are completely controlled by the Park Assist Module. Common causes include Faulty Park Assist Sensor 6, Park Assist Sensor 6 harness is open or shorted, Park Assist Sensor 6 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- B1293 Jeep indicates Park Assist Sensor 6.
- Common causes
- Common causes include Faulty Park Assist Sensor 6, Park Assist Sensor 6 harness is open or shorted, Park Assist Sensor 6 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code B1293 Jeep Description
What are the Possible Causes of the DTC B1293 Jeep?
- Faulty Park Assist Sensor 6
- Park Assist Sensor 6 harness is open or shorted
- Park Assist Sensor 6 circuit poor electrical connection
- Faulty Park Assist Module
How to Fix the DTC B1293 Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B1293-12 PTS SENSOR 6 CIRCUIT SHORT TO BATTERY
B1293-25 PTS SENSOR 6 SIGNAL SHAPE / WAVEFORM FAILURE
B1293-92 PTS SENSOR 6 PERFORMANCE OR INCORRECT OPERATION
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B1293 Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B1293 Jeep code?
Need more information on how to fix the B1293 Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B1293 Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B1293 Jeep Code
1. What are the common symptoms of OBDII code B1293 in a Jeep related to Park Assist Sensor 6?
The common symptoms include a malfunctioning or non-responsive Park Assist Sensor 6, leading to inaccurate or failed parking assistance alerts.
2. What are the possible causes of OBDII code B1293 in a Jeep for Park Assist Sensor 6?
The code B1293 can be triggered by issues such as a faulty Park Assist Sensor 6, damaged wiring or connectors, or a malfunction in the park assist system module.
3. How can I diagnose the cause of OBDII code B1293 in my Jeep for Park Assist Sensor 6?
A thorough inspection of Park Assist Sensor 6, checking for any physical damage or obstructions, testing the wiring for connectivity, and using a diagnostic scanner to read the specific error codes can help diagnose the issue.
4. Can OBDII code B1293 related to Park Assist Sensor 6 be fixed at home?
Depending on the cause, fixing the issue at home may be possible by replacing a faulty sensor, repairing damaged wiring, or resetting the park assist system. However, complex issues may require professional assistance.
5. Are there any safety concerns associated with OBDII code B1293 in a Jeep for Park Assist Sensor 6?
While the code itself does not pose a direct safety risk, a malfunctioning park assist system can affect the accuracy of parking alerts, potentially leading to parking mishaps. It's essential to address the issue promptly.
6. How much does it typically cost to repair OBDII code B1293 for Park Assist Sensor 6 in a Jeep?
The cost of repair can vary depending on the specific cause of the issue. Replacing a sensor or repairing wiring may cost a few hundred dollars, while module replacement or complex repairs could be more expensive.
7. Can ignoring OBDII code B1293 related to Park Assist Sensor 6 cause further damage to my Jeep?
Continuously ignoring the code may result in inaccurate park assist functionality, leading to potential parking accidents or damage to the vehicle. It's advisable to address the issue promptly to avoid further complications.
8. Is it safe to drive my Jeep with OBDII code B1293 related to Park Assist Sensor 6 active?
While it may be safe to drive with the code active, it's essential to be cautious when parking and rely on manual parking skills rather than solely depending on the malfunctioning park assist system until the issue is resolved.
9. Can extreme weather conditions affect the triggering of OBDII code B1293 for Park Assist Sensor 6 in a Jeep?
Extreme weather conditions such as heavy rain, snow, or extreme temperatures can potentially affect the functionality of the park assist sensors, leading to the triggering of the code. Ensuring sensors are clear and undamaged can help mitigate this.
10. How long does it usually take to repair OBDII code B1293 for Park Assist Sensor 6 in a Jeep?
The repair time can vary depending on the complexity of the issue and the availability of parts. Simple sensor replacements or wiring repairs may take a few hours, while more extensive repairs may require leaving the vehicle at a repair shop for a day or more.
Discuss the causes and fixes for B1293 Jeep OBDII Code
Code B1293 Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
