B128E Dodge Code - Park Assist Sensor 1
Quick Answer
The Park Assist Sensors (PTS) are ultrasonic transceivers that are completely controlled by the Park Assist Module. Common causes include Faulty Park Assist Sensor 1, Park Assist Sensor 1 harness is open or shorted, Park Assist Sensor 1 circuit poor electrical connection. Severity is Moderate - service should be scheduled soon. The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
- What it means
- B128E Dodge indicates Park Assist Sensor 1.
- Common causes
- Common causes include Faulty Park Assist Sensor 1, Park Assist Sensor 1 harness is open or shorted, Park Assist Sensor 1 circuit poor electrical connection.
- Severity
- Moderate - service should be scheduled soon.
- Can I drive?
- The vehicle may still be drivable for short trips if it runs normally, but avoid hard driving and repair it soon.
Code B128E Dodge Description
What are the Possible Causes of the DTC B128E Dodge?
- Faulty Park Assist Sensor 1
- Park Assist Sensor 1 harness is open or shorted
- Park Assist Sensor 1 circuit poor electrical connection
- Faulty Park Assist Module
How to Fix the DTC B128E Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B128E-12 PTS SENSOR 1 CIRCUIT SHORT TO BATTERY
B128E-25 PTS SENSOR 1 SIGNAL SHAPE / WAVEFORM FAILURE
B128E-92 PTS SENSOR 1 PERFORMANCE OR INCORRECT OPERATION
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B128E Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B128E Dodge code?
Need more information on how to fix the B128E Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B128E Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B128E Dodge Code
1. What does OBDII code B128E for Park Assist Sensor 1 in a Dodge indicate?
The B128E code indicates a fault with Park Assist Sensor 1 in the Dodge vehicle, affecting its ability to accurately detect obstacles during parking maneuvers.
2. What are the common symptoms of a B128E fault in the Park Assist Sensor 1?
Common symptoms include the Park Assist system not functioning properly, inaccurate distance readings, or complete failure of the system to detect obstacles while parking.
3. What are the possible causes of OBDII code B128E related to Park Assist Sensor 1 in a Dodge?
Possible causes include a malfunctioning Park Assist Sensor 1, damaged wiring or connectors, corrosion, or interference with the sensor's operation.
4. How can I diagnose a B128E fault in the Park Assist Sensor 1 of my Dodge?
Diagnosis typically involves using an OBDII scanner to read the specific fault code, visually inspecting the sensor and its connections for damage, and conducting tests to determine if the sensor is sending accurate signals.
5. Can I repair a B128E fault in the Park Assist Sensor 1 myself?
Depending on your skill level and access to tools, you may be able to repair the issue yourself by replacing the faulty Park Assist Sensor 1, repairing damaged wiring or connectors, or addressing any other identified causes of the fault.
6. Is it safe to drive with the B128E code related to Park Assist Sensor 1 illuminated?
While the vehicle should still be safe to drive, it is recommended to address the issue promptly to ensure the proper functioning of the Park Assist system for enhanced parking safety.
7. Will resetting the OBDII system clear the B128E fault code for Park Assist Sensor 1?
Resetting the system may temporarily clear the fault code, but if the underlying issue is not addressed, the code is likely to reappear once the system detects the problem again.
8. How much does it typically cost to repair a B128E fault in the Park Assist Sensor 1 of a Dodge?
The cost of repair can vary depending on the specific cause of the fault, the labor rates of the repair shop, and whether genuine OEM parts are used for replacement. It's advisable to obtain quotes from reputable mechanics or dealerships.
9. Are there any preventive maintenance tips to avoid encountering the B128E fault in the Park Assist Sensor 1?
Regularly inspecting the sensors, keeping them clean from dirt or debris, and ensuring proper parking practices can help prevent issues with the Park Assist system and potentially avoid the B128E fault code.
10. Can a B128E fault in the Park Assist Sensor 1 impact the vehicle's overall performance?
While the B128E fault primarily affects the Park Assist system's functionality, it does not directly impact the vehicle's driving performance. However, addressing the fault promptly is recommended for safety and convenience reasons.
Discuss the causes and fixes for B128E Dodge OBDII Code
Code B128E Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
