B127E 2018 GMC Sierra Code - Front Video Display Output Signal Malfunction
Quick Answer
The infotainment display and controls are separate components from the radio, combined into an assembly. Common causes include Faulty Front Video Display, Front Video Display harness is open or shorted, Front Video Display circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B127E 2018 GMC Sierra indicates Front Video Display Output Signal Malfunction.
- Common causes
- Common causes include Faulty Front Video Display, Front Video Display harness is open or shorted, Front Video Display circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B127E 2018 GMC Sierra Description
Control information, touch communications, and dimming level for the display are communicated via a LIN serial data circuit to the Human Machine Interface Control Module.
If the Human Machine Interface Control Module detects the display is not responding to the output on the LVDS circuits, the Human Machine Interface Control Module sets the Diagnostic Trouble Code (DTC).
What are the Possible Causes of the DTC B127E 2018 GMC Sierra?
- Faulty Front Video Display
- Front Video Display harness is open or shorted
- Front Video Display circuit poor electrical connection
- Faulty Low Voltage Differential Signaling (LVDS) Cable
How to Fix the DTC B127E 2018 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B127E 2018 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B127E 2018 GMC Sierra code?
Need more information on how to fix the B127E 2018 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B127E 2018 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B127E 2018 GMC Sierra Code
1. What are the common symptoms of OBDII code B127E in a 2018 GMC Sierra?
- Common symptoms include a malfunctioning front video display output signal, leading to a blank or distorted display on the screen.
2. What typically causes the Front Video Display Output Signal Malfunction code (B127E) in a 2018 GMC Sierra?
- This code is often triggered by a faulty front camera module, damaged wiring harness, loose connections, or issues with the display unit itself.
3. How can I diagnose the Front Video Display Output Signal Malfunction code in my 2018 GMC Sierra?
- To diagnose this issue, you may need to inspect the front camera module, check the wiring for any damage or loose connections, and test the display unit for proper functionality.
4. Can I repair OBDII code B127E in my 2018 GMC Sierra myself?
- While some basic troubleshooting like checking connections and wiring can be done by DIY enthusiasts, diagnosing and repairing the root cause may require specialized tools and expertise, so it's recommended to consult a professional mechanic.
5. Is it safe to continue driving my 2018 GMC Sierra with the Front Video Display Output Signal Malfunction code active?
- It is generally not recommended to drive your vehicle with this issue unresolved, as it may affect your visibility and compromise safety. Get it inspected and repaired as soon as possible.
6. How much does it typically cost to repair OBDII code B127E in a 2018 GMC Sierra?
- The cost of repair can vary depending on the specific cause of the issue, the parts needed, and the labor rates of the repair shop. It's best to get a diagnostic assessment for an accurate estimate.
7. Can resetting the OBDII system clear the Front Video Display Output Signal Malfunction code in my 2018 GMC Sierra?
- Resetting the system may temporarily remove the code, but if the underlying issue is not addressed, the code is likely to reappear. It's important to diagnose and fix the root cause of the problem.
8. Are there any recalls or technical service bulletins related to OBDII code B127E in a 2018 GMC Sierra?
- Check with your local GMC dealership or visit the manufacturer's website to see if there are any recalls or technical service bulletins related to this specific OBDII code in your vehicle.
9. Can extreme weather conditions affect the Front Video Display Output Signal Malfunction code in a 2018 GMC Sierra?
- Yes, extreme temperatures or moisture can sometimes cause electrical components to malfunction, leading to issues like the Front Video Display Output Signal Malfunction code. It's important to keep your vehicle protected and maintained.
10. Is it possible for the Front Video Display Output Signal Malfunction code to be a false alarm in a 2018 GMC Sierra?
- While rare, false alarms can occur due to temporary glitches in the system. If you suspect this might be the case, you can try resetting the system and monitoring the situation before seeking professional help.
Discuss the causes and fixes for B127E 2018 GMC Sierra OBDII Code
Code B127E 2018 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
