AutoCodesGeneric – B127D:02

B127D:02 Code - Microphone 3 Input Signal Circuit Short to Ground

Quick Answer

The active noise cancellation system uses three microphones in the vehicle headliner: one above each front seating position, and one above the rear seat. Common causes include Faulty Radio Volume Compensator Interior Noise Microphone, Radio Volume Compensator Interior Noise Microphone harness is open or shorted, Radio Volume Compensator Interior Noise Microphone circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means
B127D:02 indicates Microphone 3 Input Signal Circuit Short to Ground.
Common causes
Common causes include Faulty Radio Volume Compensator Interior Noise Microphone, Radio Volume Compensator Interior Noise Microphone harness is open or shorted, Radio Volume Compensator Interior Noise Microphone circuit poor electrical connection.
Severity
Low - monitor the vehicle and repair when practical.
Can I drive?
The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
AI answers can be wrong. Verify repairs with testing. Open full chat
Code Popularity 288
How popular is this code, among other codes? Low
Table of contents Created and updated by William Orellana on Nov 29, 2024
💬 Need more help? Ask Coddy for instant answers — it's free!

Code B127D:02 Description

The active noise cancellation system uses three microphones in the vehicle headliner: one above each front seating position, and one above the rear seat. The Audio Amplifier provides a bias voltage to each microphone (+) and (-) signal circuit for the operation of the microphone. The microphones monitor the vehicle cabin for undesirable engine sounds. The Audio Amplifier uses the microphone inputs and an engine RPM signal to determine the frequency of the undesirable sound. The Diagnostic Trouble Code (DTC) will be set when a short to ground is detected on the specified (+) or (−) signal circuit for more than 1.5 seconds
OBDII Code B127D:02 - Microphone 3 Input Signal Circuit Short to Ground - AutoCodes.com
B127D:02 Code - Microphone 3 Input Signal Circuit Short to Ground

What are the Possible Causes of the DTC B127D:02?

  • Faulty Radio Volume Compensator Interior Noise Microphone
  • Radio Volume Compensator Interior Noise Microphone harness is open or shorted
  • Radio Volume Compensator Interior Noise Microphone circuit poor electrical connection
  • Faulty Audio Amplifier

How to Fix the DTC B127D:02?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

Code Tech Notes

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B127D:02 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B127D:02 code?

Need more information on how to fix the B127D:02 code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B127D:02 code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B127D:02 Code

1. What does the OBDII code B127D:02 mean?

The code B127D:02 indicates that Microphone 3's input signal circuit has a short to ground, meaning the electrical signal is being interrupted or directed incorrectly.

2. What are the common symptoms of code B127D:02?

Symptoms may include poor voice recognition performance, inoperative hands-free calling, or reduced audio quality during voice commands.

3. What causes the B127D:02 code to occur?

The code can be triggered by damaged microphone wiring, a shorted microphone, faulty connectors, or a malfunctioning audio control module.

4. How can I diagnose the cause of code B127D:02?

Start by inspecting the microphone wiring and connectors for damage or corrosion. Use a multimeter to check for continuity or a short to ground.

5. Can a faulty microphone cause the B127D:02 code?

Yes, a defective or internally shorted microphone can cause this code to register.

6. Is it safe to drive with the B127D:02 code?

Yes, it is generally safe to drive, but hands-free calling or voice command features may not function properly.

7. How do I fix the B127D:02 code?

Repairs may include replacing damaged wires, fixing or replacing connectors, or swapping out the faulty microphone.

8. Do I need to replace the audio control module to fix code B127D:02?

Replacing the audio control module is rarely necessary unless it has been confirmed as the root cause after ruling out wiring and microphone issues.

9. Can a software update resolve the B127D:02 code?

In rare cases, a software update or reset of the audio system may resolve the issue, but hardware checks should be performed first.

10. How much does it cost to repair the B127D:02 code?

Repair costs vary depending on the issue. Replacing a microphone typically costs $50-$150, while more extensive wiring repairs may cost more.

Discuss the causes and fixes for B127D:02 OBDII Code

Code B127D:02 comments

No comments found for this page.

AutoCodes App

Fix Your Car Smarter

Try the New AutoCodes App!

Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.

AutoCodes App on Google Play