B127A:04 Code - Auxiliary Video Input Signal Circuit Open Circuit
Quick Answer
The rear seat entertainment system has an auxiliary input assembly that contains a USB port, an SD card reader, RCA-type audio/video jacks, and a wired headphone jack with volume control. Common causes include Faulty Audio/Video Input Adapter, Audio/Video Input Adapter harness is open or shorted, Audio/Video Input Adapter circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B127A:04 indicates Auxiliary Video Input Signal Circuit Open Circuit.
- Common causes
- Common causes include Faulty Audio/Video Input Adapter, Audio/Video Input Adapter harness is open or shorted, Audio/Video Input Adapter circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B127A:04 Description
The USB port and SD card reader slot interface with a hub device, internal to the assembly. The assembly receives fused battery voltage and ground from the harness to power the internal hub device as well as provide additional amperage to power USB devices.
The internal hub device interfaces directly with the disc player via a standard USB cable. A Mini-type USB connector is used to connect the cable to the disc player and the auxiliary input assembly. Mini-type USB male-to-female connections are used for connecting USB cables together where an in-line connection is required. An in-line cable connection is typically found between the console and the I/P harness.
The USB port allows connectivity to the rear seat entertainment system from portable media players or a USB storage device (memory stick/ flash drive). The rear seat entertainment uses the SD card reader as a mass storage device, like a USB storage device.
Once a supported device is connected to the USB port or SD card reader, the device may be sourced to one or both of the rear displays using the remote control.
What are the Possible Causes of the DTC B127A:04?
- Faulty Audio/Video Input Adapter
- Audio/Video Input Adapter harness is open or shorted
- Audio/Video Input Adapter circuit poor electrical connection
- Faulty Media Disc Player
How to Fix the DTC B127A:04?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B127A:04 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B127A:04 code?
Need more information on how to fix the B127A:04 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B127A:04 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B127A:04 Code
No Frequently Asked Questions about B127A:04 Code found.
Discuss the causes and fixes for B127A:04 OBDII Code
Code B127A:04 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
