B125A 2014 GMC Sierra Code - Antenna Signal Circuit
Quick Answer
The digital radio receiver, located inside the radio, receives digital radio information from the digital radio antenna located on the outside of the vehicle. Common causes include Faulty Radio Unit, Faulty Coax Cable, Faulty Cellular Phone, Navigation, and Digital Radio Antenna. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B125A 2014 GMC Sierra indicates Antenna Signal Circuit.
- Common causes
- Common causes include Faulty Radio Unit, Faulty Coax Cable, Faulty Cellular Phone, Navigation, and Digital Radio Antenna.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B125A 2014 GMC Sierra Description
What are the Possible Causes of the DTC B125A 2014 GMC Sierra?
- Faulty Radio Unit
- Faulty Coax Cable
- Faulty Cellular Phone, Navigation, and Digital Radio Antenna
How to Fix the DTC B125A 2014 GMC Sierra?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B125A:02 Antenna Signal Circuit Short to Ground
B125A:04 Antenna Signal Circuit Open
Poor AM and FM radio reception may be due to multiple influences, some of which may not be vehicle related. Areas that have high RF traffic or block the signal path may cause a degradation in radio reception. Radio reception may also be influenced by items within the vehicle, but not part of the radio system. Such examples are aftermarket electrical accessories or other items which may generate noise in the vehicle's electrical system. Aftermarket window tinting, especially when there is metallic in the film, may reduce radio reception.
AM reception is highly dependent on the antenna amplifier receiving battery voltage from the radio and being properly grounded. The antenna base has a built-in antenna amplifier that boosts both AM and FM reception. When the antenna amplifier does not receive power, AM stations may not be received, and FM reception will be limited. If the antenna base is not properly grounded, excessive interference in the signal may occur or reception may be limited.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B125A 2014 GMC Sierra code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B125A 2014 GMC Sierra code?
Need more information on how to fix the B125A 2014 GMC Sierra code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B125A 2014 GMC Sierra code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B125A 2014 GMC Sierra Code
1. What does the OBDII code B125A mean on a 2014 GMC Sierra?
The B125A code refers to an issue with the antenna signal circuit, indicating a fault in the communication or performance of the antenna system.
2. What are the common symptoms of code B125A in a 2014 GMC Sierra?
Symptoms may include poor radio reception, static or no signal, and issues with satellite radio or GPS functionality.
3. What causes the B125A code in a GMC Sierra?
Common causes include a damaged antenna, faulty antenna cable, loose or corroded connections, or a malfunctioning radio receiver module.
4. How do I diagnose the B125A code on my 2014 GMC Sierra?
Start by visually inspecting the antenna and its wiring for signs of damage. Use a multimeter to check for continuity and ensure proper voltage at the antenna circuit.
5. Can a weak radio signal trigger the B125A code?
Yes, a weak or disrupted radio signal can be caused by a faulty antenna or interference, which may lead to this code being stored.
6. Is the B125A code specific to the radio antenna?
Not always. This code can also relate to the satellite or GPS antenna circuits, depending on the vehicle's setup.
7. How can I fix the B125A code on my 2014 GMC Sierra?
Repairs may involve replacing a damaged antenna, securing loose connections, repairing or replacing the antenna cable, or reprogramming or replacing the radio receiver module.
8. Can weather affect the antenna signal circuit and trigger B125A?
Yes, extreme weather conditions, such as heavy rain or snow, can disrupt the antenna signal or cause water intrusion, leading to this code.
9. Do I need special tools to fix the B125A code?
Basic tools like a multimeter and potentially an OBDII scanner are needed to diagnose the issue. Advanced repairs may require specialized tools for module reprogramming.
10. Is it safe to drive with the B125A code on a 2014 GMC Sierra?
Yes, it is generally safe to drive, but features like the radio, GPS, or satellite systems may not function properly until the issue is fixed.
Discuss the causes and fixes for B125A 2014 GMC Sierra OBDII Code
Code B125A 2014 GMC Sierra comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
