B125A:02 Code - Antenna Signal Circuit Short to Ground
Quick Answer
The digital radio receiver, located inside the radio, receives digital radio information from the digital radio antenna located on the outside of the vehicle. Common causes include Faulty Radio Unit, Faulty Coax Cable, Faulty Cellular Phone, Navigation, and Digital Radio Antenna. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B125A:02 indicates Antenna Signal Circuit Short to Ground.
- Common causes
- Common causes include Faulty Radio Unit, Faulty Coax Cable, Faulty Cellular Phone, Navigation, and Digital Radio Antenna.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B125A:02 Description
What are the Possible Causes of the DTC B125A:02?
- Faulty Radio Unit
- Faulty Coax Cable
- Faulty Cellular Phone, Navigation, and Digital Radio Antenna
How to Fix the DTC B125A:02?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B125A:02 Antenna Signal Circuit Short to Ground
B125A:04 Antenna Signal Circuit Open
Poor AM and FM radio reception may be due to multiple influences, some of which may not be vehicle related. Areas that have high RF traffic or block the signal path may cause a degradation in radio reception. Radio reception may also be influenced by items within the vehicle, but not part of the radio system. Such examples are aftermarket electrical accessories or other items which may generate noise in the vehicle's electrical system. Aftermarket window tinting, especially when there is metallic in the film, may reduce radio reception.
AM reception is highly dependent on the antenna amplifier receiving battery voltage from the radio and being properly grounded. The antenna base has a built-in antenna amplifier that boosts both AM and FM reception. When the antenna amplifier does not receive power, AM stations may not be received, and FM reception will be limited. If the antenna base is not properly grounded, excessive interference in the signal may occur or reception may be limited.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B125A:02 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B125A:02 code?
Need more information on how to fix the B125A:02 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B125A:02 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B125A:02 Code
What does OBD-II code B125A:02 mean?
Code B125A:02 indicates an issue with the antenna signal circuit, specifically a short to ground, which can disrupt communication or signal reception.
What are the common symptoms of code B125A:02?
Symptoms include poor radio signal reception, inability to tune to certain stations, or complete loss of audio functionality in the infotainment system.
What causes OBD-II code B125A:02?
Common causes include damaged antenna wiring, faulty antenna connections, corrosion at wiring terminals, or a defective antenna assembly.
Can a short to ground in the antenna circuit damage other components?
Yes, a short to ground can potentially damage related electrical components over time, such as the radio unit or infotainment system.
How do I diagnose code B125A:02?
Inspect the antenna wiring and connectors for visible damage, corrosion, or pinched cables. Use a multimeter to check for continuity and confirm the short to ground.
Can code B125A:02 be cleared without repairs?
Clearing the code without addressing the root cause may result in the code reappearing and continued issues with signal reception.
How much does it typically cost to fix code B125A:02?
Repair costs vary depending on the issue but typically range from $50 to $200 for wiring repairs or up to $500 if antenna replacement is required.
Can I drive with code B125A:02?
Yes, the vehicle is still drivable, but you may experience radio or infotainment system malfunctions until the issue is resolved.
Is code B125A:02 specific to certain car brands?
No, this code can appear on any vehicle equipped with OBD-II diagnostics and an antenna system, though its frequency may vary by brand or model.
Do I need special tools to fix code B125A:02?
Basic tools like a multimeter, wire connectors, and electrical tape may be sufficient for repairs, but advanced diagnostics may require professional equipment.
Discuss the causes and fixes for B125A:02 OBDII Code
Code B125A:02 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
