B125A:01 Code - Antenna Signal Circuit Short to Battery
Quick Answer
The digital radio receiver, located inside the radio, receives digital radio information from the digital radio antenna located on the outside of the vehicle. Common causes include Faulty Radio Unit, Faulty Coax Cable, Faulty Cellular Phone, Navigation, and Digital Radio Antenna. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B125A:01 indicates Antenna Signal Circuit Short to Battery.
- Common causes
- Common causes include Faulty Radio Unit, Faulty Coax Cable, Faulty Cellular Phone, Navigation, and Digital Radio Antenna.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B125A:01 Description
What are the Possible Causes of the DTC B125A:01?
- Faulty Radio Unit
- Faulty Coax Cable
- Faulty Cellular Phone, Navigation, and Digital Radio Antenna
How to Fix the DTC B125A:01?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B125A:02 Antenna Signal Circuit Short to Ground
B125A:04 Antenna Signal Circuit Open
Poor AM and FM radio reception may be due to multiple influences, some of which may not be vehicle related. Areas that have high RF traffic or block the signal path may cause a degradation in radio reception. Radio reception may also be influenced by items within the vehicle, but not part of the radio system. Such examples are aftermarket electrical accessories or other items which may generate noise in the vehicle's electrical system. Aftermarket window tinting, especially when there is metallic in the film, may reduce radio reception.
AM reception is highly dependent on the antenna amplifier receiving battery voltage from the radio and being properly grounded. The antenna base has a built-in antenna amplifier that boosts both AM and FM reception. When the antenna amplifier does not receive power, AM stations may not be received, and FM reception will be limited. If the antenna base is not properly grounded, excessive interference in the signal may occur or reception may be limited.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B125A:01 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B125A:01 code?
Need more information on how to fix the B125A:01 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B125A:01 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B125A:01 Code
1. What does the OBDII code B125A:01 mean?
The code B125A:01 indicates an issue with the antenna signal circuit, specifically a short to the battery or a higher-than-expected voltage in the circuit.
2. What are the symptoms of the B125A:01 code?
Common symptoms include poor or no radio reception, static or interference during radio use, and possible warning lights or error messages on the infotainment display.
3. What causes the B125A:01 code to appear?
This code is often caused by damaged antenna wiring, a short circuit to the power supply, a faulty antenna module, or corrosion at electrical connections.
4. Can a blown fuse cause the B125A:01 code?
A blown fuse is not a direct cause of this code, but related electrical issues, such as a short to the battery, could damage a fuse and trigger the code.
5. How can I diagnose the B125A:01 code?
Start by inspecting the antenna wiring and connections for damage or corrosion. Use a multimeter to check for short circuits and verify proper voltage levels in the antenna signal circuit.
6. Is it safe to drive with the B125A:01 code?
Yes, it is generally safe to drive with this code, but your radio or infotainment system may not function properly until the issue is resolved.
7. How do I fix the B125A:01 code?
Repairs may involve replacing damaged wiring, repairing short circuits, cleaning corroded connections, or replacing a faulty antenna or antenna module.
8. Can a faulty radio head unit trigger the B125A:01 code?
While rare, a malfunctioning radio head unit could potentially cause this code if it improperly supplies voltage to the antenna circuit.
9. How much does it cost to repair the B125A:01 code?
Repair costs can range from $50 to $300, depending on whether the issue involves simple wiring repairs or replacing components like the antenna module.
10. Can I clear the B125A:01 code without fixing the problem?
Clearing the code without repairing the underlying issue may temporarily remove the error, but the code will likely return once the vehicle detects the fault again.
Discuss the causes and fixes for B125A:01 OBDII Code
Code B125A:01 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
