B125A Code - Antenna Signal Circuit
Quick Answer
The digital radio receiver, located inside the radio, receives digital radio information from the digital radio antenna located on the outside of the vehicle. Common causes include Faulty Radio Unit, Faulty Coax Cable, Faulty Cellular Phone, Navigation, and Digital Radio Antenna. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B125A indicates Antenna Signal Circuit.
- Common causes
- Common causes include Faulty Radio Unit, Faulty Coax Cable, Faulty Cellular Phone, Navigation, and Digital Radio Antenna.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B125A Description
What are the Possible Causes of the DTC B125A?
- Faulty Radio Unit
- Faulty Coax Cable
- Faulty Cellular Phone, Navigation, and Digital Radio Antenna
How to Fix the DTC B125A?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
B125A:02 Antenna Signal Circuit Short to Ground
B125A:04 Antenna Signal Circuit Open
Poor AM and FM radio reception may be due to multiple influences, some of which may not be vehicle related. Areas that have high RF traffic or block the signal path may cause a degradation in radio reception. Radio reception may also be influenced by items within the vehicle, but not part of the radio system. Such examples are aftermarket electrical accessories or other items which may generate noise in the vehicle's electrical system. Aftermarket window tinting, especially when there is metallic in the film, may reduce radio reception.
AM reception is highly dependent on the antenna amplifier receiving battery voltage from the radio and being properly grounded. The antenna base has a built-in antenna amplifier that boosts both AM and FM reception. When the antenna amplifier does not receive power, AM stations may not be received, and FM reception will be limited. If the antenna base is not properly grounded, excessive interference in the signal may occur or reception may be limited.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B125A code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B125A code?
Need more information on how to fix the B125A code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B125A code diagnosed by a professional: Find a repair shop in your area
Information for Specific Makes
- B125A Buick — Antenna Signal Circuit
- B125A Cadillac — Antenna Signal Circuit
- B125A Chevrolet — Antenna Signal Circuit
- B125A GMC — Antenna Signal Circuit
Frequently Asked Questions about B125A Code
1. What are common symptoms of OBDII code B125A (Antenna Signal Circuit)?
- Common symptoms include poor or no radio reception, issues with GPS signal, and malfunctioning keyless entry system.
2. What are the possible causes of OBDII code B125A (Antenna Signal Circuit)?
- The code B125A can be caused by a faulty antenna module, damaged antenna wiring, or a malfunctioning body control module.
3. How can I diagnose the cause of OBDII code B125A (Antenna Signal Circuit)?
- Diagnose the code by checking the antenna connections, inspecting the wiring for damage, and using a multimeter to test for continuity.
4. Can a DIY enthusiast repair OBDII code B125A (Antenna Signal Circuit)?
- DIY repairs for this code may include checking and repairing antenna connections, replacing damaged wiring, or swapping out the antenna module if needed.
5. Is it safe to continue driving with OBDII code B125A (Antenna Signal Circuit)?
- While the vehicle may still be drivable with this code, it is recommended to address the issue promptly to prevent further problems with the vehicle's electronics.
6. How much does it cost to repair OBDII code B125A (Antenna Signal Circuit) at a mechanic?
- The cost of repairs for this code can vary depending on the exact cause, but it may range from $100 to $300 at a mechanic's shop.
7. Can OBDII code B125A (Antenna Signal Circuit) cause other electrical issues in the vehicle?
- Yes, unresolved issues related to the antenna signal circuit can lead to additional electrical problems, affecting systems like the radio, GPS, and keyless entry.
8. What are some preventive maintenance tips to avoid OBDII code B125A (Antenna Signal Circuit)?
- Regularly inspecting the antenna connections, keeping the antenna clean, and avoiding water damage can help prevent issues related to this code.
9. Are there any recalls related to OBDII code B125A (Antenna Signal Circuit)?
- It's advisable to check with the vehicle manufacturer or the National Highway Traffic Safety Administration (NHTSA) for any recalls associated with this code.
10. How long does it typically take to repair OBDII code B125A (Antenna Signal Circuit)?
- The repair time for this code can vary depending on the complexity of the issue, but it generally takes a few hours to a full day for diagnosis and repair.
Discuss the causes and fixes for B125A OBDII Code
Code B125A comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
