B1252 FORD - USB Port Circuit Short to Ground
B1252 FORD Possible Causes
- Faulty USB Cable and Port
- USB Cable and Port harness is open or shorted
- USB Cable and Port circuit poor electrical connection
- Faulty Accessory Protocol Interface Module (APIM)
How do I fix code B1252 FORD?Check the "Possible Causes" listed above. Visually inspect the related wiring harness and connectors. Check for damaged components and look for broken, bent, pushed out, or corroded connector's pins.
Cost of diagnosing the B1252 FORD code
Labor: 1.0The cost of diagnosing the B1252 FORD code is 1.0 hour of labor. The auto repair labor rates vary by location, your vehicle's make and model, and even your engine type. Most auto repairs shops charge between $75 and $150 per hour.
- Engine Light ON (or Service Engine Soon Warning Light)
B1252 FORD DescriptionThe media hub requires an external power and ground circuit to operate. Loss of power or ground disables all media hub functionality. One USB cable connects the media hub to the Accessory Protocol Interface Module (APIM). The OBDII code sets when the APIM detects an over-current condition in the USB circuit. This can be caused by a fault in the USB cable and port, or by the customer USB device.
More InformationNeed more information on how to fix the B1252 FORD code?
Get Access to Factory Service Manuals
Need more help?Get the B1252 Ford code diagnosed by a professional: Find a repair shop in your area
CommentsHelp us improve AutoCodes.com. Leave a comment below or tell us if the information above help you fix the code. What are the symptoms on your vehicle for the B1252 Ford code? Have you replaced any parts?
Any information is appreciated. Thanks