B124C 2017 Toyota RAV4 Code - Automatic High Beam Camera
Quick Answer
This Diagnostic Trouble Code (DTC) is stored when the Main Body ECU (Multiplex Network Body ECU) detects a malfunction in the Forward Recognition Camera. Common causes include Faulty Forward Recognition Camera, Forward Recognition Camera harness is open or shorted, Forward Recognition Camera circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B124C 2017 Toyota RAV4 indicates Automatic High Beam Camera.
- Common causes
- Common causes include Faulty Forward Recognition Camera, Forward Recognition Camera harness is open or shorted, Forward Recognition Camera circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B124C 2017 Toyota RAV4 Description
What are the Possible Causes of the DTC B124C 2017 Toyota RAV4?
- Faulty Forward Recognition Camera
- Forward Recognition Camera harness is open or shorted
- Forward Recognition Camera circuit poor electrical connection
- Faulty Main Body ECU (Multiplex Network Body ECU)
How to Fix the DTC B124C 2017 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
Code Tech Notes
If the forward recognition camera has been replaced with a new one, be sure to perform Recognition Camera/Target Position Memory and Recognition Camera Axis Adjust.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B124C 2017 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B124C 2017 Toyota RAV4 code?
Need more information on how to fix the B124C 2017 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B124C 2017 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B124C 2017 Toyota RAV4 Code
1. What does OBDII code B124C for a 2017 Toyota RAV4 Automatic High Beam Camera indicate?
The code B124C typically indicates a malfunction in the Automatic High Beam Camera system of the 2017 Toyota RAV4.
2. What are common symptoms of OBDII code B124C in a 2017 Toyota RAV4?
Common symptoms of code B124C may include the automatic high beams not functioning properly, warning lights on the dashboard, or error messages related to the high beam camera system.
3. What are possible causes of OBDII code B124C in a 2017 Toyota RAV4?
Possible causes of code B124C can include faulty high beam camera sensors, wiring issues, a malfunctioning control module, or software glitches within the system.
4. How can I diagnose the OBDII code B124C in a 2017 Toyota RAV4?
Diagnosing code B124C typically involves using a diagnostic scanner to retrieve the code, checking the high beam camera system for physical damage or loose connections, and conducting tests to pinpoint the exact cause of the issue.
5. Can I still drive my 2017 Toyota RAV4 with OBDII code B124C?
While it may be possible to drive the vehicle with the code present, it is recommended to address the issue promptly to ensure the proper functioning of the automatic high beam camera system.
6. How can I reset OBDII code B124C in a 2017 Toyota RAV4?
Resetting code B124C usually involves using a diagnostic scanner to clear the code after the underlying issue has been identified and repaired. Simply clearing the code without fixing the problem may cause it to reappear.
7. Is it safe to attempt DIY repairs for OBDII code B124C in a 2017 Toyota RAV4?
While some DIY enthusiasts may be able to address simpler issues related to code B124C, more complex problems with the automatic high beam camera system may require professional diagnosis and repair to ensure proper functionality and safety.
8. How much does it cost to repair OBDII code B124C in a 2017 Toyota RAV4?
The cost of repairing code B124C can vary depending on the specific cause of the issue, the parts needed for repair, labor costs, and whether the repair is done at a dealership or an independent repair shop.
9. Can OBDII code B124C in a 2017 Toyota RAV4 cause other systems to malfunction?
While code B124C is specific to the automatic high beam camera system, it is possible for malfunctions in one system to potentially impact or trigger issues in other related systems within the vehicle.
10. How can I prevent OBDII code B124C from reoccurring in my 2017 Toyota RAV4?
To prevent code B124C from reoccurring, it is essential to address any underlying issues promptly, perform regular maintenance on the automatic high beam camera system, and follow the manufacturer's recommended service schedule for your vehicle.
Discuss the causes and fixes for B124C 2017 Toyota RAV4 OBDII Code
Code B124C 2017 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
