B124B 2018 Toyota RAV4 Code - Automatic High Beam System
Quick Answer
This Diagnostic Trouble Code (DTC) is stored when the Main Body ECU (Multiplex Network Body ECU) detects a malfunction in the Forward Recognition Camera. Common causes include Faulty Forward Recognition Camera, Forward Recognition Camera harness is open or shorted, Forward Recognition Camera circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B124B 2018 Toyota RAV4 indicates Automatic High Beam System.
- Common causes
- Common causes include Faulty Forward Recognition Camera, Forward Recognition Camera harness is open or shorted, Forward Recognition Camera circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B124B 2018 Toyota RAV4 Description
What are the Possible Causes of the DTC B124B 2018 Toyota RAV4?
- Faulty Forward Recognition Camera
- Forward Recognition Camera harness is open or shorted
- Forward Recognition Camera circuit poor electrical connection
- Faulty Main Body ECU (Multiplex Network Body ECU)
How to Fix the DTC B124B 2018 Toyota RAV4?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B124B 2018 Toyota RAV4 code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B124B 2018 Toyota RAV4 code?
Need more information on how to fix the B124B 2018 Toyota RAV4 code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B124B 2018 Toyota RAV4 code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B124B 2018 Toyota RAV4 Code
1. What does OBDII code B124B on a 2018 Toyota RAV4 indicate?
- OBDII code B124B in a 2018 Toyota RAV4 relates to a fault in the Automatic High Beam System.
2. What are the common symptoms of OBDII code B124B in a 2018 Toyota RAV4?
- Common symptoms include the automatic high beams failing to function properly or staying on continuously.
3. What are the possible causes of OBDII code B124B in a 2018 Toyota RAV4?
- The code can be triggered by issues such as a faulty automatic high beam sensor, wiring issues, or a malfunction in the high beam control module.
4. How can I diagnose the cause of OBDII code B124B in my 2018 Toyota RAV4?
- A thorough inspection of the automatic high beam system components, including the sensor, wiring, and control module, is recommended to pinpoint the exact cause.
5. Can I still drive my 2018 Toyota RAV4 with OBDII code B124B?
- It is generally safe to drive the vehicle with this code, but it is advisable to address the issue promptly to ensure proper functioning of the Automatic High Beam System.
6. How can I reset OBDII code B124B on my 2018 Toyota RAV4?
- Resetting the code can be done using an OBDII scanner or by disconnecting the car's battery for a few minutes. However, it's crucial to address the underlying issue to prevent the code from reappearing.
7. Is it possible to repair OBDII code B124B in a 2018 Toyota RAV4 without professional help?
- While some basic troubleshooting like checking for loose connections or damaged wiring can be done by DIY enthusiasts, complex repairs involving sensor or module replacements may require professional assistance.
8. How much does it typically cost to repair OBDII code B124B in a 2018 Toyota RAV4?
- The cost of repair can vary depending on the exact cause of the issue and whether any parts need replacement. It's advisable to consult a mechanic for a precise estimate.
9. Will OBDII code B124B cause my 2018 Toyota RAV4 to fail an emissions test?
- Typically, this code is related to the Automatic High Beam System and should not cause your vehicle to fail an emissions test.
10. How can I prevent OBDII code B124B from recurring in my 2018 Toyota RAV4?
- Regular maintenance checks, prompt repairs of any related issues, and ensuring the Automatic High Beam System components are in good condition can help prevent the code from reoccurring.
Discuss the causes and fixes for B124B 2018 Toyota RAV4 OBDII Code
Code B124B 2018 Toyota RAV4 comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
