B123E Jeep Code - PTS Sensor 10 Ring Time Too Long
Quick Answer
The Park Assist Module monitors the Park Assist (PTS) Sensor #10. Common causes include Faulty Park Assist (PTS) Sensor #10, Park Assist (PTS) Sensor #10 harness is open or shorted, Park Assist (PTS) Sensor #10 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B123E Jeep indicates PTS Sensor 10 Ring Time Too Long.
- Common causes
- Common causes include Faulty Park Assist (PTS) Sensor #10, Park Assist (PTS) Sensor #10 harness is open or shorted, Park Assist (PTS) Sensor #10 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B123E Jeep Description
What are the Possible Causes of the DTC B123E Jeep?
- Faulty Park Assist (PTS) Sensor #10
- Park Assist (PTS) Sensor #10 harness is open or shorted
- Park Assist (PTS) Sensor #10 circuit poor electrical connection
- Faulty Park Assist Module
How to Fix the DTC B123E Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B123E Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B123E Jeep code?
Need more information on how to fix the B123E Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B123E Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B123E Jeep Code
1. What are the common symptoms of OBDII code B123E in a Jeep related to the PTS Sensor 10 Ring Time Too Long?
The common symptoms include issues with starting the vehicle, difficulty shifting gears, and a malfunctioning key fob.
2. What could cause the OBDII code B123E to appear in a Jeep?
The code B123E indicating PTS Sensor 10 Ring Time Too Long in a Jeep is often caused by a faulty ParkSense sensor or a problem with the wiring connected to the sensor.
3. How can I diagnose the issue causing the OBDII code B123E in my Jeep?
Diagnosing the problem involves checking the ParkSense sensor for physical damage, testing the sensor's electrical connection, and inspecting the wiring harness for any issues.
4. Is it safe to continue driving my Jeep with the OBDII code B123E present?
It is not recommended to drive the vehicle with the B123E code active, as it can lead to further damage and potential safety risks due to the malfunctioning PTS Sensor.
5. Can I repair the OBDII code B123E in my Jeep by myself?
Depending on your mechanical skills and access to tools, you may be able to address the issue causing the B123E code yourself by replacing the faulty ParkSense sensor or repairing any damaged wiring.
6. Will resetting the OBDII code B123E make it go away permanently?
Resetting the code may temporarily clear the warning light, but if the underlying issue with the PTS Sensor 10 Ring Time Too Long is not addressed, the code is likely to reappear.
7. How much does it typically cost to repair the OBDII code B123E in a Jeep at a dealership or repair shop?
The cost of repairing the B123E code can vary depending on the extent of the damage and the labor rates of the service provider, but it may range from a few hundred to over a thousand dollars.
8. Are there any preventive measures to avoid encountering the OBDII code B123E in my Jeep in the future?
Regularly inspecting and maintaining the ParkSense sensor, as well as ensuring the wiring connections are secure, can help prevent issues that trigger the B123E code.
9. Can extreme weather conditions or external factors trigger the OBDII code B123E in a Jeep?
Extreme weather conditions or external factors like water damage or debris accumulation around the ParkSense sensor can potentially trigger the B123E code due to interference with sensor operation.
10. How urgent is it to address the OBDII code B123E related to the PTS Sensor 10 Ring Time Too Long in a Jeep?
It is advisable to address the B123E code promptly to prevent further complications and ensure the proper functioning of the ParkSense system in your Jeep.
Discuss the causes and fixes for B123E Jeep OBDII Code
Code B123E Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
