B123E Dodge Code - PTS Sensor 10 Ring Time Too Long
Quick Answer
The Park Assist Module monitors the Park Assist (PTS) Sensor #10. Common causes include Faulty Park Assist (PTS) Sensor #10, Park Assist (PTS) Sensor #10 harness is open or shorted, Park Assist (PTS) Sensor #10 circuit poor electrical connection. Severity is High - diagnose this code as soon as possible. Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
- What it means
- B123E Dodge indicates PTS Sensor 10 Ring Time Too Long.
- Common causes
- Common causes include Faulty Park Assist (PTS) Sensor #10, Park Assist (PTS) Sensor #10 harness is open or shorted, Park Assist (PTS) Sensor #10 circuit poor electrical connection.
- Severity
- High - diagnose this code as soon as possible.
- Can I drive?
- Driving is not recommended if the warning light is flashing, the engine runs poorly, or safety-related symptoms are present.
Code B123E Dodge Description
What are the Possible Causes of the DTC B123E Dodge?
- Faulty Park Assist (PTS) Sensor #10
- Park Assist (PTS) Sensor #10 harness is open or shorted
- Park Assist (PTS) Sensor #10 circuit poor electrical connection
- Faulty Park Assist Module
How to Fix the DTC B123E Dodge?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B123E Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B123E Dodge code?
Need more information on how to fix the B123E Dodge code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B123E Dodge code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B123E Dodge Code
1. What are the common symptoms of OBDII code B123E in a Dodge related to the PTS Sensor 10 Ring Time Too Long?
- Common symptoms include the vehicle failing to start, difficulty shifting gears, and the transmission going into limp mode.
2. What can cause the OBDII code B123E in a Dodge indicating that the PTS Sensor 10 Ring Time is Too Long?
- The code B123E can be triggered by a faulty Park/Neutral Position (PNP) switch, a defective transmission range sensor, or issues with the transmission control module.
3. How can I diagnose the OBDII code B123E in a Dodge related to the PTS Sensor 10 Ring Time Too Long?
- Diagnosis typically involves using a scan tool to retrieve the specific fault code, checking the wiring and connections to the PNP switch and transmission range sensor, and testing the functionality of these components.
4. What are some repair tips for resolving the OBDII code B123E in a Dodge due to the PTS Sensor 10 Ring Time Too Long?
- Repair tips may include replacing the faulty PNP switch or transmission range sensor, repairing any damaged wiring or connectors, and ensuring proper alignment and calibration of the sensors.
5. Can the OBDII code B123E in a Dodge be fixed without professional help?
- While some DIY enthusiasts may be able to diagnose and fix simpler issues related to this code, complex transmission-related problems often require professional diagnosis and repair.
6. Are there any safety concerns associated with ignoring the OBDII code B123E indicating the PTS Sensor 10 Ring Time Too Long in a Dodge?
- Ignoring this code can lead to potential safety risks such as loss of vehicle control, stalling while driving, or transmission failure, so it's important to address the issue promptly.
7. How do I reset the OBDII code B123E in a Dodge after repairing the PTS Sensor 10 Ring Time Too Long issue?
- The code can typically be reset using an OBDII scanner or by disconnecting the vehicle's battery for a few minutes to clear the stored fault code.
8. Will driving my Dodge with the OBDII code B123E related to the PTS Sensor 10 Ring Time Too Long damage the vehicle further?
- Continuing to drive with this code present can potentially cause further damage to the transmission components, leading to more costly repairs down the line.
9. Is the OBDII code B123E related to the PTS Sensor 10 Ring Time Too Long a common issue in Dodge vehicles?
- While not extremely common, issues related to the PTS Sensor 10 Ring Time Too Long can occur in Dodge vehicles, especially in older models or those with high mileage.
10. How much can I expect to pay to repair the OBDII code B123E indicating the PTS Sensor 10 Ring Time Too Long in my Dodge?
- Repair costs can vary depending on the specific cause of the issue, but typically range from a few hundred to a thousand dollars, including parts and labor.
Discuss the causes and fixes for B123E Dodge OBDII Code
Code B123E Dodge comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
