AutoCodes – Generic – B123D

B123D Code - PTS Sensor 10 Ring Time Too Short

Quick Answer

The Park Assist Module monitors the Park Assist (PTS) Sensor #10. Common causes include Faulty Park Assist (PTS) Sensor #10, Park Assist (PTS) Sensor #10 harness is open or shorted, Park Assist (PTS) Sensor #10 circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: B123D indicates PTS Sensor 10 Ring Time Too Short.
Common causes: Common causes include Faulty Park Assist (PTS) Sensor #10, Park Assist (PTS) Sensor #10 harness is open or shorted, Park Assist (PTS) Sensor #10 circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,233

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 19, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B123D Description

The Park Assist Module monitors the Park Assist (PTS) Sensor #10. The Park Assist Module sets the OBDII code when the Park Assist (PTS) Sensor #10 is not to factory specifications.

OBDII Code B123D - PTS Sensor 10 Ring Time Too Short - AutoCodes.com — B123D Code - PTS Sensor 10 Ring Time Too Short

What does this mean?

What are the Possible Causes of the DTC B123D?

Faulty Park Assist (PTS) Sensor #10
Park Assist (PTS) Sensor #10 harness is open or shorted
Park Assist (PTS) Sensor #10 circuit poor electrical connection
Faulty Park Assist Module

How to Fix the DTC B123D?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B123D code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B123D code?

Need more information on how to fix the B123D code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B123D code diagnosed by a professional: Find a repair shop in your area

Information for Specific Makes

B123D Chrysler — PTS Sensor 10 Ring Time Too Short
B123D Dodge — PTS Sensor 10 Ring Time Too Short
B123D Jeep — PTS Sensor 10 Ring Time Too Short
B123D RAM — PTS Sensor 10 Ring Time Too Short

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B123D Code

1. What are the common symptoms of OBDII code B123D (PTS Sensor 10 Ring Time Too Short)?

The common symptoms of OBDII code B123D include issues with the parking sensors, such as inaccurate readings or failure to detect obstacles.

2. What are some possible causes of OBDII code B123D?

Possible causes of OBDII code B123D include faulty parking sensors, damaged wiring or connections, or issues with the sensor calibration.

3. How can I diagnose the cause of OBDII code B123D?

To diagnose the cause of OBDII code B123D, you can use a diagnostic scanner to read the code and inspect the parking sensors and related wiring for any visible damage or issues.

4. What are some repair tips for OBDII code B123D?

Repair tips for OBDII code B123D may include cleaning the sensor connections, replacing faulty sensors, checking and repairing any damaged wiring, and calibrating the sensors as per manufacturer's instructions.

5. Can OBDII code B123D be cleared/reset, or does it require a repair?

OBDII code B123D can be cleared/reset using a diagnostic scanner, but it is recommended to diagnose and repair the underlying issue causing the code to prevent it from reoccurring.

6. How important is it to address OBDII code B123D promptly?

It is important to address OBDII code B123D promptly to ensure the proper functioning of the parking sensors, which are essential for safe parking and obstacle detection.

7. Are there any safety concerns associated with OBDII code B123D?

While OBDII code B123D may not directly impact the safety of driving, it can affect the accuracy of parking sensors, potentially leading to difficulties in parking and increased risk of collisions.

8. Can I repair OBDII code B123D myself, or should I seek professional help?

Depending on your automotive repair skills and knowledge, you may be able to address OBDII code B123D yourself by following repair guides and instructions. However, if you are unsure or uncomfortable with the repair process, it is advisable to seek professional help.

9. Is OBDII code B123D specific to a certain make or model of vehicle?

OBDII code B123D (PTS Sensor 10 Ring Time Too Short) may be specific to certain makes and models of vehicles equipped with parking sensors, so it is recommended to consult the vehicle's service manual for more information.

10. How can I prevent OBDII code B123D from occurring in the future?

To prevent OBDII code B123D from occurring in the future, regular maintenance of the parking sensors, keeping the sensors clean, and following the manufacturer's recommendations for sensor calibration can help maintain their proper functioning.