AutoCodes – Chrysler – B123B Chrysler

B123B Chrysler Code - PTS Sensor 10 Circuit Low

Quick Answer

The Park Assist Module monitors the Park Assist (PTS) Sensor #10. Common causes include Faulty Park Assist (PTS) Sensor #10, Park Assist (PTS) Sensor #10 harness is open or shorted, Park Assist (PTS) Sensor #10 circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: B123B Chrysler indicates PTS Sensor 10 Circuit Low.
Common causes: Common causes include Faulty Park Assist (PTS) Sensor #10, Park Assist (PTS) Sensor #10 harness is open or shorted, Park Assist (PTS) Sensor #10 circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 3,082

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 19, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B123B Chrysler Description

The Park Assist Module monitors the Park Assist (PTS) Sensor #10. The Park Assist Module sets the OBDII code when the Park Assist (PTS) Sensor #10 is not to factory specifications.

OBDII Code B123B Chrysler - PTS Sensor 10 Circuit Low - AutoCodes.com — B123B Chrysler Code - PTS Sensor 10 Circuit Low

What does this mean?

What are the Possible Causes of the DTC B123B Chrysler?

Faulty Park Assist (PTS) Sensor #10
Park Assist (PTS) Sensor #10 harness is open or shorted
Park Assist (PTS) Sensor #10 circuit poor electrical connection
Faulty Park Assist Module

How to Fix the DTC B123B Chrysler?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B123B Chrysler code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B123B Chrysler code?

Need more information on how to fix the B123B Chrysler code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B123B Chrysler code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B123B Chrysler Code

1. What are common symptoms of OBDII code B123B Chrysler (PTS Sensor 10 Circuit Low)?

Common symptoms include issues with the Park Assist System (PTS) functionality, such as inaccurate sensor readings or warning lights on the dashboard.

2. What causes the OBDII code B123B Chrysler to trigger?

The code B123B is triggered when the Park Assist Sensor 10 circuit is detecting a low voltage condition, which can be caused by a faulty sensor, wiring issues, or a defective control module.

3. How can I diagnose the cause of OBDII code B123B Chrysler?

Diagnosing the cause typically involves inspecting the Park Assist Sensor 10, checking the wiring for any damage or loose connections, and using a diagnostic tool to scan for specific fault codes.

4. Can I still drive my vehicle with the OBDII code B123B Chrysler active?

It is generally safe to drive the vehicle with the code active, but it is recommended to address the underlying issue as soon as possible to ensure the proper functioning of the Park Assist System.

5. How can I repair OBDII code B123B Chrysler?

Repairing the code may involve replacing the faulty Park Assist Sensor 10, repairing any damaged wiring, or reprogramming the control module. It is recommended to consult a professional mechanic for an accurate diagnosis and repair.

6. Are there any DIY tips for troubleshooting OBDII code B123B Chrysler?

DIY tips may include visually inspecting the sensors and wiring, checking the fuse related to the Park Assist System, and ensuring all connections are secure before seeking professional help.

7. How much does it cost to repair OBDII code B123B Chrysler?

The cost of repair can vary depending on the specific issue causing the code, the labor rates in your area, and whether you choose to address the problem yourself or seek help from a professional mechanic.

8. Can a low battery voltage cause OBDII code B123B Chrysler to trigger?

Yes, a low battery voltage can potentially cause the code to trigger as it may affect the overall electrical system, including the Park Assist Sensor 10 circuit.

9. Will OBDII code B123B Chrysler prevent my vehicle from passing emissions tests?

The code B123B itself is not directly related to emissions, so it should not prevent your vehicle from passing emissions tests. However, it is important to address any underlying issues to ensure proper functionality.

10. Are there any recalls or technical service bulletins related to OBDII code B123B Chrysler?

It is recommended to check with your local Chrysler dealership or visit the NHTSA website to see if there are any recalls or technical service bulletins related to the OBDII code B123B and the Park Assist System in your specific vehicle model.