AutoCodes – Dodge – B1239 Dodge

B1239 Dodge Code - PTS Sensor 9 Ring Time Too Long

Quick Answer

The Park Assist Module monitors the Park Assist (PTS) Sensor #9. Common causes include Faulty Park Assist (PTS) Sensor #9, Park Assist (PTS) Sensor #9 harness is open or shorted, Park Assist (PTS) Sensor #9 circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: B1239 Dodge indicates PTS Sensor 9 Ring Time Too Long.
Common causes: Common causes include Faulty Park Assist (PTS) Sensor #9, Park Assist (PTS) Sensor #9 harness is open or shorted, Park Assist (PTS) Sensor #9 circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 1,404

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 19, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B1239 Dodge Description

The Park Assist Module monitors the Park Assist (PTS) Sensor #9. The Park Assist Module sets the OBDII code when the Park Assist (PTS) Sensor #9 is not to factory specifications.

OBDII Code B1239 Dodge - PTS Sensor 9 Ring Time Too Long - AutoCodes.com — B1239 Dodge Code - PTS Sensor 9 Ring Time Too Long

What does this mean?

What are the Possible Causes of the DTC B1239 Dodge?

Faulty Park Assist (PTS) Sensor #9
Park Assist (PTS) Sensor #9 harness is open or shorted
Park Assist (PTS) Sensor #9 circuit poor electrical connection
Faulty Park Assist Module

How to Fix the DTC B1239 Dodge?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B1239 Dodge code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B1239 Dodge code?

Need more information on how to fix the B1239 Dodge code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B1239 Dodge code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B1239 Dodge Code

1. What are the common symptoms of OBDII code B1239 in a Dodge vehicle?

- Common symptoms include issues with the powertrain control module (PCM), rough idle, poor acceleration, and reduced fuel efficiency.

2. What does the OBDII code B1239 Dodge mean?

- The code indicates that the PTS (Park/Neutral Position) Sensor 9 Ring Time is too long, signaling a potential problem with the sensor's operation.

3. What are the possible causes of the B1239 code in a Dodge vehicle?

- The code can be triggered by a faulty PTS sensor, damaged wiring or connectors, a malfunctioning PCM, or issues with the transmission range sensor.

4. How can I diagnose the OBDII code B1239 in my Dodge?

- To diagnose the issue, you can use a diagnostic scanner to retrieve the specific fault codes, inspect the PTS sensor and related components for any visible damage, and perform electrical tests to check for continuity and proper voltage.

5. What are the repair options for OBDII code B1239 in a Dodge vehicle?

- Repair options include replacing the faulty PTS sensor, repairing or replacing damaged wiring or connectors, resetting the PCM, and ensuring proper alignment of the sensor.

6. Can I continue driving my Dodge with the B1239 fault code?

- It is not recommended to continue driving with the B1239 fault code as it can lead to further damage to the transmission or engine components. It is advisable to address the issue promptly.

7. How much does it typically cost to repair the B1239 code in a Dodge vehicle?

- The cost of repair can vary depending on the exact cause of the issue, but it may range from $100 to $300 for parts and labor.

8. Is the B1239 code a common issue in Dodge vehicles?

- While it may not be one of the most common OBDII codes, the B1239 code can still occur in Dodge vehicles, particularly in older models or vehicles with high mileage.

9. Can I reset the B1239 fault code in my Dodge without repairing the issue?

- While you can clear the fault code using a diagnostic scanner, it is not recommended to do so without addressing the underlying problem, as it may result in recurring issues and potential damage.

10. How can I prevent the B1239 code from occurring in my Dodge in the future?

- To prevent the B1239 code from reoccurring, it is important to perform regular maintenance on your vehicle, including inspecting and replacing sensors and related components as needed.