B122F Jeep Code - PTS Sensor 7 Ring Time Too Long
Quick Answer
The Park Assist Module monitors the Park Assist (PTS) Sensor #7. Common causes include Faulty Park Assist (PTS) Sensor #7, Park Assist (PTS) Sensor #7 harness is open or shorted, Park Assist (PTS) Sensor #7 circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
- What it means
- B122F Jeep indicates PTS Sensor 7 Ring Time Too Long.
- Common causes
- Common causes include Faulty Park Assist (PTS) Sensor #7, Park Assist (PTS) Sensor #7 harness is open or shorted, Park Assist (PTS) Sensor #7 circuit poor electrical connection.
- Severity
- Low - monitor the vehicle and repair when practical.
- Can I drive?
- The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.
Code B122F Jeep Description
What are the Possible Causes of the DTC B122F Jeep?
- Faulty Park Assist (PTS) Sensor #7
- Park Assist (PTS) Sensor #7 harness is open or shorted
- Park Assist (PTS) Sensor #7 circuit poor electrical connection
- Faulty Park Assist Module
How to Fix the DTC B122F Jeep?
Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.
What is the Cost to Diagnose the Code?
Labor: 1.0
To diagnose the B122F Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.
Need more information about the B122F Jeep code?
Need more information on how to fix the B122F Jeep code? Get Access to Factory Service Manuals
Need Help with the Code?
Get the B122F Jeep code diagnosed by a professional: Find a repair shop in your area
Frequently Asked Questions about B122F Jeep Code
1. What are the common symptoms of OBDII code B122F for PTS Sensor 7 Ring Time Too Long?
- Common symptoms include issues with the push-button start system, difficulty starting the vehicle, and potential intermittent starting problems.
2. What could be the possible causes of OBDII code B122F in a Jeep related to PTS Sensor 7 Ring Time Too Long?
- Possible causes may include a faulty PTS sensor, wiring or connection issues, a defective push-button start switch, or a problem with the vehicle's security system.
3. How can I diagnose the cause of OBDII code B122F for PTS Sensor 7 Ring Time Too Long in my Jeep?
- Diagnosis typically involves checking the PTS sensor operation, inspecting wiring and connections for damage, testing the push-button start switch, and verifying the security system functionality.
4. Is it safe to continue driving my Jeep with OBDII code B122F related to PTS Sensor 7 Ring Time Too Long?
- It is not recommended to drive the vehicle with this issue, as it may lead to potential starting failures or other related problems. It is advisable to address the cause promptly.
5. Can I reset the OBDII code B122F for PTS Sensor 7 Ring Time Too Long in my Jeep using a diagnostic tool?
- While clearing the code may temporarily remove the warning light, it is crucial to address the underlying cause to prevent the code from reoccurring.
6. Are there any simple repair tips for fixing OBDII code B122F in a Jeep with PTS Sensor 7 Ring Time Too Long?
- Basic repair tips include checking for loose connections, ensuring the PTS sensor is properly aligned, and inspecting for any visible damage in the system components.
7. How much does it typically cost to repair OBDII code B122F related to PTS Sensor 7 Ring Time Too Long in a Jeep?
- Repair costs can vary depending on the specific cause of the issue, but they may range from a simple sensor replacement to more extensive wiring or system repairs.
8. Can a DIY enthusiast fix OBDII code B122F for PTS Sensor 7 Ring Time Too Long in their Jeep?
- Depending on the individual's skill level and access to tools, some DIY enthusiasts may be able to address simpler issues like loose connections, but more complex repairs may require professional assistance.
9. Will fixing OBDII code B122F related to PTS Sensor 7 Ring Time Too Long improve my Jeep's overall performance?
- Resolving this issue can help ensure proper starting functionality and potentially prevent further starting problems, thus enhancing the overall performance and reliability of the vehicle.
10. How often does OBDII code B122F for PTS Sensor 7 Ring Time Too Long occur in Jeep vehicles?
- While not extremely common, this code can appear in Jeep vehicles with push-button start systems, especially when there are underlying sensor or wiring issues present.
Discuss the causes and fixes for B122F Jeep OBDII Code
Code B122F Jeep comments
No comments found for this page.
Fix Your Car Smarter
Try the New AutoCodes App!
Get complete OBDII diagnostics, repair solutions, and cost estimates, plus AI chat support on demand.
