AutoCodes – Jeep – B122E Jeep

B122E Jeep Code - PTS Sensor 7 Ring Time Too Short

Quick Answer

The Park Assist Module monitors the Park Assist (PTS) Sensor #7. Common causes include Faulty Park Assist (PTS) Sensor #7, Park Assist (PTS) Sensor #7 harness is open or shorted, Park Assist (PTS) Sensor #7 circuit poor electrical connection. Severity is Low - monitor the vehicle and repair when practical. The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

What it means: B122E Jeep indicates PTS Sensor 7 Ring Time Too Short.
Common causes: Common causes include Faulty Park Assist (PTS) Sensor #7, Park Assist (PTS) Sensor #7 harness is open or shorted, Park Assist (PTS) Sensor #7 circuit poor electrical connection.
Severity: Low - monitor the vehicle and repair when practical.
Can I drive?: The vehicle can usually be driven if no severe symptoms are present, but symptoms should be checked before extended driving.

Save to My Repairs My Repairs

AI answers can be wrong. Verify repairs with testing. Open full chat

Code Popularity 4,193

How popular is this code, among other codes? Low

Repair Importance Level

Low (Monitor) (1 / 3)

Repair Difficulty Level

Intermediate (2 / 3)

What is this?

Table of contents Created and updated by William Orellana on Nov 19, 2024

Description
Possible Causes
How To Fix
Cost to Diagnose
FAQs
Comments
Add Comment

💬 Need more help? Ask Coddy for instant answers — it's free!

Code B122E Jeep Description

The Park Assist Module monitors the Park Assist (PTS) Sensor #7. The Park Assist Module sets the OBDII code when the Park Assist (PTS) Sensor #7 is not to factory specifications.

OBDII Code B122E Jeep - PTS Sensor 7 Ring Time Too Short - AutoCodes.com — B122E Jeep Code - PTS Sensor 7 Ring Time Too Short

What does this mean?

What are the Possible Causes of the DTC B122E Jeep?

Faulty Park Assist (PTS) Sensor #7
Park Assist (PTS) Sensor #7 harness is open or shorted
Park Assist (PTS) Sensor #7 circuit poor electrical connection
Faulty Park Assist Module

How to Fix the DTC B122E Jeep?

Review the 'Possible Causes' above and visually examine the corresponding wiring harness and connectors. Check for damaged components and inspect connector pins for signs of being broken, bent, pushed out, or corroded.

What is the Cost to Diagnose the Code?

Labor: 1.0

To diagnose the B122E Jeep code, it typically requires 1.0 hour of labor. Rates vary by location, vehicle, and shop. Many shops charge between $80–$150 per hour; dealerships and metro areas may be higher, independents may be lower.

Need more information about the B122E Jeep code?

Need more information on how to fix the B122E Jeep code? Get Access to Factory Service Manuals

Need Help with the Code?

Get the B122E Jeep code diagnosed by a professional: Find a repair shop in your area

About the author: William Orellana is a Master Mechanic and Mechanical Engineer with over 30 years of experience diagnosing and repairing vehicles. Learn more about his background.

Frequently Asked Questions about B122E Jeep Code

1. What are the common symptoms of OBDII code B122E in a Jeep related to PTS Sensor 7 Ring Time Too Short?

- Common symptoms include intermittent starting issues, difficulty engaging the ignition system, and potential stalling while driving.

2. What can cause the OBDII code B122E in a Jeep indicating PTS Sensor 7 Ring Time Too Short?

- The code may be triggered by a faulty PTS (Park/Transmission Sensor) or issues with the wiring and connections related to the sensor.

3. How can I diagnose the OBDII code B122E in a Jeep for PTS Sensor 7 Ring Time Too Short?

- Use a diagnostic scanner to read the code, inspect the PTS sensor and its wiring for damages or loose connections, and perform a thorough visual inspection of the sensor's location.

4. Are there any quick fixes or temporary solutions for the OBDII code B122E related to PTS Sensor 7 Ring Time Too Short?

- Quick fixes may include cleaning the sensor connections, ensuring proper alignment of the sensor, or resetting the code to see if it reoccurs.

5. What are the repair options for resolving the OBDII code B122E in a Jeep for PTS Sensor 7 Ring Time Too Short?

- Repair options may involve replacing the faulty PTS sensor, repairing damaged wiring, or seeking professional assistance for a thorough diagnosis and repair.

6. Can driving with the OBDII code B122E present in a Jeep indicating PTS Sensor 7 Ring Time Too Short cause further damage?

- Continuing to drive with this code present may lead to unpredictable behavior in the ignition system and potential safety risks, so it is advisable to address the issue promptly.

7. How much does it typically cost to repair the OBDII code B122E in a Jeep related to PTS Sensor 7 Ring Time Too Short?

- The cost of repair can vary depending on the exact cause of the issue, but it may involve parts and labor expenses ranging from $100 to $300 or more.

8. Can I reset the OBDII code B122E indicating PTS Sensor 7 Ring Time Too Short in a Jeep without fixing the underlying problem?

- While you can clear the code temporarily, it is recommended to address the root cause to prevent potential safety hazards and ensure the proper functioning of the vehicle.

9. Are there any recalls or technical service bulletins related to the OBDII code B122E in a Jeep for PTS Sensor 7 Ring Time Too Short?

- Check with your local Jeep dealership or online resources for any relevant recalls or technical service bulletins that may apply to this specific OBDII code.

10. Does the OBDII code B122E in a Jeep for PTS Sensor 7 Ring Time Too Short affect vehicle performance?

- Yes, this code can impact the proper operation of the ignition system, potentially leading to starting issues or stalling, which can affect the overall performance of the vehicle.